Schwinn 170 Service Manual page 27

6. Installation is the reverse procedure. Installation does not require the
use of the crank puller.
To reinstall the Pedals, carefully align the threads and hand tighten to
prevent cross-threading. Then tighten fully with pedal wrench.
Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals
on the correct side of the Bike. Orientation is based from a
seated position on the bike. The Left Pedal has an "L", the
Right Pedal an "R".
7. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
(R)
27
(L)