Preparations For Riding At High Temperatures And Low Speeds; Preparations For Riding At Low Temperatures And In Snow - KTM 250 EXC E-Starter EU 2010 Owner's Manual

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION

Preparations for riding at high temperatures and low speeds

8.7

Preparations for riding at low temperatures and in snow

8.8
–
Check the radiator cap.
Value on the radiator cap
» If the displayed value does not equal the setpoint value:
600872-10
–
Change the radiator cap.
–
Seal the air filter box.
Tip
Seal the air filter box at the edges to prevent dirt from entering.
–
Clean the air filter.
Info
Check the air filter approx. every 30 minutes.
–
Adjust the secondary ratio to the terrain.
Info
The engine oil heats up rapidly if the clutch needs to be operated too fre-
quently because the secondary ratio is too long.
–
Clean the chain.
Chain cleaner (
–
Clean the radiator fins.
600868-01
–
Carefully align bent radiator fins.
–
Check the coolant level. (
–
Seal the air filter box.
Tip
Seal the air filter box at the edges to prevent dirt from entering.
–
Clean the air filter.
Info
Check the air filter approx. every 30 minutes.
–
Mount the rain cover for the air filter.
Rain cover for air filter (59006021000)
Info
Follow the KTM PowerParts mounting instructions.
–
Adjust the carburetor jetting and setting.
Info
600870-01
The recommended carburetor tuning is available from your authorized KTM
workshop.
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
x
x ( p. 72)
p. 98)
p. 68)
x
x ( p. 72)
27