Table of Contents
Advertisement
3.
Remove the cable from the clips on the fan assembly (4).
To install the power connector cable, reverse this procedure.
I/O board
To remove the I/O board, use this procedure and illustration.
Table 6-7
I/O board description and part number
Description
I/O board
I/O board cable
Before removing the I/O board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the I/O board:
1.
Remove the Phillips M2.0 × 3.0 screw (1) that secures the bracket to the computer, and then remove the
bracket (2).
2.
Disconnect the cable from the ZIF connector on the I/O board (3).
48
Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
37).
37).
Battery on page
39).
Spare part number
N13300-001
N13301-001
Advertisement
Table of Contents
