6.
Remove the grounding tape from the right screw (5).
7.
Remove the three Phillips M2.0 × 2.5 screws (1) that secure the touchpad to the computer.
8.
Remove the touchpad (2).
To install the touchpad, reverse this procedure.
Plastic rear vent and fin
To remove the plastic rear vent and fin, use this procedure and illustration.
Table 6-12
Plastic rear vent and fin descriptions and part numbers
Description
Dummy fin
Plastic rear vent
Before removing the plastic rear vent and fin, follow these steps:
56
Chapter 6 Removal and replacement procedures for authorized service provider parts
Spare part number
N13308-001
N13307-001