Table of Contents
Advertisement
6
Removal and replacement procedures for
authorized service provider parts
This chapter provides removal and replacement procedures for authorized service provider parts.
IMPORTANT:
provider. Accessing these parts can damage the computer or void the warranty.
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer.
Component replacement procedures
To remove and replace computer components, use these procedures.
NOTE:
HP continually improves and changes product parts. For complete and current information about
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Make special note of each screw size and location during removal and replacement.
Preparation for disassembly
To remove and replace computer components, use these procedures.
See
Removal and replacement procedures preliminary requirements on page 24
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Bottom cover
To remove the bottom cover, use this procedure and illustration.
Table 6-1
Bottom cover description and part number
Description
Bottom cover for use in ceramic white models
Bottom cover for use in mica silver models
Bottom cover for use in performance blue models
Before removing the bottom cover, prepare the computer for disassembly (see
page
37).
Components described in this chapter should be accessed only by an authorized service
Removal and replacement procedures for authorized service provider parts
for initial safety procedures.
Spare part number
N13316-001
N13317-001
N13318-001
Preparation for disassembly on
37
Advertisement
Table of Contents
