GFK-2436M
3. If your current firmware version is 3.x, go to step 4. Otherwise go to Step 3 a.
a. Click on Put File and select "geamxcupg_6104.rom" from upgrade kit for release 3.3.
b. Enter password G5 (case sensitive, must be upper case G) in Remote file. For Remote host,
enter the IP address of the Micro PLC (for example: 10.10.0.2).
Figure 7: G5 Remote Host
c. When the file is downloaded, the utility will respond with the following.
Figure 8: G5 Successful Download
4. Click on Put File and Local file to be downloaded (Modbus_TCP).
June 2023
9