Table of Contents
Advertisement
GFK-2436M
Downloading Ethernet Drivers
The Ethernet drivers for the Ethernet Option Module are downloaded
mas.my.site.com/communities/CC_Home.
Files and passwords are:
Function
Emerson SRTP
Modbus TCP (Client and Server in single firmware)*
Tunneling or Pass Thru**
* When the Ethernet option module is loaded with the Modbus image it cannot communicate with PME.
**When the Tunneling image is loaded, the 175000 baud rate is configurable only when the CPU Performance parameter is set to High
in Telnet Configurator. The CPU Performance parameter is available in the Expert Setting menu.
Downloading is done using the PumpKIN utility, which is included. To download a driver, perform the
following procedure. Only one driver can be present at one time. After the driver has been downloaded you
will have to reconfigure the port using Telnet.
To Download Ethernet Drivers:
1. Before performing the firmware upgrade, make sure TFTP Download is set to Enabled.
Note: Refer to the Security Settings section for more details.
Important: Failure to enable TFTP Download before updating firmware can result in damage to device.
2. Open the PumpKIN Utility
Figure 6: PumpKIN Utility
https://emerson-
Upgrade Kit for Release 3.3
82A1587-MS10-000-B1
82A1588-MS10-000-B3
82A1589-MS10-000-B1
June 2023
Destination Password
G7
G7
G7
8
Advertisement
Table of Contents
