Advertisement
Safety Instructions
Always ground yourself to remove any static charge before touching the CPU card. Modern
electronic devices are very sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or
static-shielded bag when they are not in the chassis.
Please read these safety instructions carefully.
• Please keep this user's manual for later reference.
• Please disconnect this equipment from any AC outlet before cleaning. Do not
use acid or caustic liquid or spray detergents for cleaning. The good option is to use a damp cloth.
• Do not touch the LCD panel surface with sharp or hard objects.
• For pluggable equipment, the power outlet must be installed near the equipment and must be
easily accessible.
• Place this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage..
• Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
• Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
• All cautions and warnings on the equipment should be noted.
• If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
• Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
6
Advertisement
