1. Manuals
  2. Brands
  3. Acnodes Manuals
  4. Touch Panel
  5. PC 6170
  6. User manual

Acnodes PC 6170 User Manual

17” pentium-m panel pc
Hide thumbs Also See for PC 6170:
Table of Contents

Advertisement

Quick Links

Download this manual
PC 6170
17" Pentium-M PANEL PC
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Acnodes PC 6170

Summary of Contents for Acnodes PC 6170

  • Page 1 PC 6170 17” Pentium-M PANEL PC User’s Manual...
  • Page 2 Acnodes Co., Ltd. assumes no responsibility for any infringements of patents or other rights of third parties, which may result from its use. Acnodes assumes no responsibility for any inaccuracies that may be contained in this document. Acnodes makes no commitment to update or to keep current the information contained in this manual.
  • Page 3 CE Marking ‹ FCC Class A ‹ FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Safety Precautions

    5. Turn OFF the system power before cleaning. Clean the system using a cloth only. Do not spray any liquid cleaner directly onto the screen. The PC 6170 may come with or w/o a touch screen. Although the touch screen is chemical resistant, it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen.
  • Page 5 Trademarks Acknow ledgments Acnodes is a trademark of Acnodes Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation. MS-DOS, Microsoft C and QuickBASIC are trademarks of Microsoft Corporation.
  • Page 6 This page does not contain any information.

  • Page 7: Table Of Contents

    Chapter 1 Introduction ------------------------------- 1 General Description ... 1 Specifications ... 2 Dimensions ... 5 Front View and I/O Outlets ... 6 1.4.1 Front Vi ew ... 6 1.4.2 I/O Outl et ... 7 Package list... 8 Chapter 2 Hardware Installatioin ----------------- 9 CPU and DRAM Installation ...
  • Page 8 3.2.2 Driver Installation- Wi ndows 98/2000/XP/CE.NET/XP-Embedded ... 27 3.2.3 Driver Installati on- DOS ... 29 3.2.4 Driver Installati on- Li nux ... 31 Dual LAN ... 33 Chapter 4 Embedded O.S. Installation -------- 35 Windows XP Embedded ... 35 4.1.1 Penmount Touch Screen ... 35 Windows CE.NET 4.2 ...

  • Page 9: Chapter 1 Introduction

    „ Package List „ General Description The PC 6170 is an ultra slim Panel PC which equipped with superior Pentium® M processor and 17" has friendly user interface design of using front access USB, may let the customers easily connect keyboard/mouse and USB storage device.

  • Page 10: Specifications

    PC 6170 User’s Manual a high stability and high reliable Panel PC. At the same time, with the Ultra Slim case design, customers can easily install PANEL1170-810 everywhere. Easy-to-Maintenance Design: Back Door The back panel of removable fasten screws. Users can install the CPU, Memory, and HDD without using screw driver to open the main cabinet.
  • Page 11 RATA-100 as PIO Mode 0-4, DMA Mode 0-2 and Ultra DMA/33/66/100 Onboard Serial ATA: „ Independent DMA operation on two ports. Data transfer rate up to 150 Mbyte/s Altemate Device IDE and RAID Class Code option for support of Soft RAID. Introduction PC 6170 User’s Manual...

  • Page 12: System Specification

    PC 6170 User’s Manual System Specification 17” TFT LCD „ Disk drive housing: „ − 1x Build-in Slim type FDD, − 1x optional slim type CD-ROM diver, − 1 x internal 3.5” drive (or 2X 2.5” HDD) 180W AC power supply...

  • Page 13: Dimensions

    PC 6170 User’s Manual Dimensions The following diagrams show the dimensions and outlines of PC 6170. Introduction...

  • Page 14: Front View And I/O Outlets

    PC 6170 User’s Manual Front View and I/O Outlets 1.4.1 Front View The figure below shows the features and controls on the PC 6170 front panel. Introduction...

  • Page 15: I/O Outlet

    1.4.2 I/O Outlet The following figure shows the I/O locations of the PC 6170. Most of the I/O connectors are located on the back panel of the PC 6170. AC inlet Power Switch Line-in Line-Out Mouse Keyboard 10/100 Ethernet 10/100/1000 Ethernet Introduction PC 6170 User’s Manual...

  • Page 16: Package List

    PC 6170 User’s Manual Package list When you receive the PC 6170 there are following items in the package. 1. P1170-810 x 1 2. CPU cooler x 1 3. AC power cord x 1 (U.S standard) 4. Panel mount kit x 10 5.

  • Page 17: Chapter 2 Hardware Installatioin

    C h a p t e r Hardware Installation The PC 6170 provides lots of flexible ways for you to select different configuration such as CPU, CD-ROM and more. The chapter will show you how to install the hardware. It includes: CPU and DRAM Installation The standard PC 6170 system was designed Pentium M level CPUs.
  • Page 18 PC 6170 User’s Manual 2. Install the CPU, DDR DRAM and Mini-PCI card in the P-1170-810. DRAM Mini-PCI Hardware Installation...

  • Page 19: Hdd Installation

    PC 6170 User’s Manual HDD Installation The PC 6170 offers a convenient drive bay module for users to install HDD. The PC 6170 offers one 3.5” HDD drive for users to install. want install 2.5” HDDs, the PC 6170 also provides the 3.5”...
  • Page 20 C 6170 User’s Manual 3. Unscrew 1 screw from the HDD drive bracket, and push the HDD bracket kit. 4. Set the 3.5” HDD (or 2.5” HDD) in the HDD bracket kit and fix it by 4 screws around the bracket kit. 5.

  • Page 21: Cd-Rom Installation

    PC 6170 User’s Manual CD-ROM Installation The PC 6170 offers a convenient drive bay module for users to install CD-ROM. When installing the CD-ROM, refer to the following instructions and illustration: 1. Open the back door. 2. Unscrew 3 screws and remove the Riser card bracket kit.
  • Page 22 PC 6170 User’s Manual 4. Put the CD-ROM in the drive bracket and fix it by 6 screws. Hardware Installation...

  • Page 23: Add-On Card Installation

    5. Fix CD-ROM drive bracket by two screws at the side of the PC 6170. Add-on Card Installation The PC 6170 provides a riser card for PCI slots expansion. The riser card assembly can accommodate both half-size expansion cards. To install the riser card, refer to the following figure and instructions...

  • Page 24: Serial Ports

    The printer interface is a 25-pin D-SUB connector. To connect any parallel device, just plug in the device connector to the 25-pin D-SUB. The PC 6170 has an analog RGB interface connector. It is able to connect to an expansion CRT monitor, and the system can display on both the flat panel and the CRT simultaneously.

  • Page 25: Ethernet

    The PC 6170 provides an NE2000 compatible Ethernet (RJ-45) interface. For network connection, just plug in one cable end of the PC 6170 10/100/1000-Base-T Hub into the standard RJ-45 connector. The pin assignment of the RJ-45 is listed below; R J - 4 5 C o n n e c to r Pin A ssignme nt...

  • Page 26: Mountings: Panel/Wall/Desktop/Vesa/Rack

    Panel/Wall/Desktop/VESA/Rack There application Panel/Wall/Desktop/VESA/Rack mountings. 2.9.1 VESA-ARM The PC 6170 provides two ways for VESA mount: 75x75 mm and 100x100 mm. Screw four screws to fix the kit (included in the package) in the back chassis. options PC 6170, Hardware Installation...

  • Page 27: Wall Mount

    PC 6170 User’s Manual 2.9.2 Wall Mount The PC 6170 is designed for Wall mount application. To mount the PC 6170, the standard set of mounting kit (included in the system packaging) is needed. Please refer to the following figure.
  • Page 28 PC 6170 User’s Manual 2. Fix the Wall mount bracket kit in back of the VESA bracket kit by 4 screws. Hardware Installation...

  • Page 29: Desktop Kit Assembly

    PC 6170 User’s Manual 2.9.3 Desktop Kit Assembly The PC 6170 is designed for desktop application. The standard set of desktop kit is included in the system packaging. Please refer to the following figure. 1. Fix VESA bracket kit in back of chassis by 4 screws.
  • Page 30 PC 6170 User’s Manual 3. Fix two holders by 2 screws. 4. Complete. Hardware Installation...

  • Page 31: Panel-Mount Kit Assembly

    PC 6170 User’s Manual 2.9.4 Panel-mount Kit Assembly The PC 6170 is designed for panel mount application. To mount the PC 6170, the standard set of mounting kit (included in the system packaging) is needed. Hardware Installation...

  • Page 32: Rack Mounting Assembly

    PC 6170 User’s Manual 2.9.5 Rack mounting Assembly The PC 6170 is designed for rack mounting application. Remove plugs from front panel. their rack. Then, user could mount PC 6170 at remove Hardware Installation remove remove remove...

  • Page 33: Chapter 3 Driver Installation

    System PC 6170 could support with Windows 95, Windows 98 or Windows 2000/XP. To facilitate installation system driver, you should read the instructions this chapter installation. Insert Driver CD and select the \P1170-810\Driver\.. Select all files and follow the install procedure and press OK.

  • Page 34: Touch Screen

    PC 6170 User’s Manual Touch Screen 3.2.1 Specification To u c h S c r e e n : For 8-wire analog resistive type T o uc h S c r e en C o nt r o l l er :...

  • Page 35: Driver Installation- Windows 98/2000/Xp/Ce.net/Xp-Embedded

    3.2.2 Driver Installation- Windows 98/2000/XP/CE.NET/XP-Embedded The touch screen of PC 6170 provides a driver for use with Windows 95, Windows 98 or Windows 2000/XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 36 PC 6170 User’s Manual Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK. Driver Installation...

  • Page 37: Driver Installation- Dos

    Touchscreen Driver Installation 13 do not need to detect the specified IRQ number. For example, you do not need to detect IRQ5, and the command is: C:\PENMOUNT\PMDETECT -N5 Driver Installation PC 6170 User’s Manual utility install PenMount PMDETECT (e.g.
  • Page 38 PC 6170 User’s Manual If you do not need to detect IRQ5 and IRQ9, the command is: C:\PENMOUNT\PMDETECT -N5 -N9 Do Calibration 1. To adjust the touch screen mapping properly to display screen, use PM.BAT (C:\PENMOUNT\PM) to do calibration. Choose “1”...

  • Page 39: Driver Installation- Linux

    Follow the install procedure and press OK. Please reboot system. Click Start menu and select “PenMount Utilities”. You can see PenMount Control Panel Advance Setup Before install the Touch Screen Driver, please open the file in Linux File /etc/rc.local Driver Installation PC 6170 User’s Manual...
  • Page 40 PC 6170 User’s Manual 2. Key-in the following words. Setserial /dev/ttyS2 port 0x3e8 irq 10 screen port) 3. Save and exit. 4. Please reboot. 5. After reset system, Insert Driver CD. Do Calibration Insert Driver CD and select the “\P1170-810\Driver\Touch\Linux XFree86 4.x.x Driver V2.1\Calibration\ pencal-2.00”...

  • Page 41: Dual Lan

    Dual LAN The Dual LAN of PC 6170 provides a driver for use with Windows 95, Windows 98 or Windows 2000/XP. To facilitate installation of the Dual LAN driver, you should read the instructions in this chapter carefully before you attempt installation.
  • Page 42 PC 6170 User’s Manual This page does not contain any information. Driver Installation...

  • Page 43: Chapter 4 Embedded O.s. Installation

    Onboard audio Touch screen 4.1.1 Penmount Touch Screen PC 6170 has Penmount touch screen on COM3, which is disabled by default. Before you can use and calibrate it, you should : 1. Set up Penmount touch device driver by executing c:\Program Files\PenMount\setup.exe.

  • Page 44: Windows Ce.net 4.2

    „ PS2 Keyboard and mouse CRT/LCD display Compact flash Onboard audio Touch screen Note: PC 6170 does not support Ethernet. 4.2.1 Calibration Touch Screen In this image we add PenMount Touch drivers and utilities. customized for 1280x1024. Calibration: Click “Start\Programs\PenMount TouchPanel\Calibration”...

  • Page 45: Appendix A Sb83810 Bios Setup

    SBC83810 BIOS Setup The board used in the PC 6170 is SBC83810. The different settings available in the Award BIOS that comes with the SBC83810. Also contained here are instructions on how to set up the BIOS configuration. A.1 Standard CMOS Setup Menu The items in Standard CMOS Setup Menu are divided into 10 categories.
  • Page 46 PC 6170 User’s Manual Date The date format is <day>, <date> <month> <year>. Press <F3> to show the calendar. The day of we e k , from Sun to S a t, determined by the B IOS, is read only...
  • Page 47 The system boot will not stop for a disk error; All, But Diskette it will stop for all other errors. The system boot will not stop for a keyboard or All, But Disk/Key disk error; it will stop for all other errors. SBC83810 BIOS Setup PC 6170 User’s Manual...

  • Page 48: Advanced Bios Features

    PC 6170 User’s Manual A.2 Advanced BIOS Features This section allows you to configure and improve your system and allows you to set up some system features according to your preference. CMOS Setup Utility-Copyright © 2000-2004 Aw ard Softw are...

  • Page 49: Virus Warning

    If set as Enabled, BIOS will shorten or skip some check items during POST. The default setting is “Enabled”. Enabled Disabled SBC83810 BIOS Setup PC 6170 User’s Manual Enable cache Disable cache Enable Quick POST Norm al POST...
  • Page 50 PC 6170 User’s Manual First/Second/Third Boot Device These items allow the selection of the 1 system will search for during its boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM. Boot Other Device This item allows the user to enable/disable the boot device not listed on the First/Second/Third boot devices option above.
  • Page 51 Typematic Delay (Msec) This option sets the display time interval from the first to the second character when holding a key. The default value is “250”. 1000 SBC83810 BIOS Setup PC 6170 User’s Manual 250 msec 500 msec 750 msec 1000 msec...

  • Page 52: Security Option

    PC 6170 User’s Manual Security Option This item allows you to limit access to the system and Setup, or just to Setup. The default value is “Setup”. The system will not boot and access to Setup will be System denied if the incorrect password is entered at the prompt.

  • Page 53: Advanced Chipset Features

    DRAM Data Integrity Mode This option sets the data integrity mode of the DRAM installed in the system. The default setting is “Non-ECC”. SBC83810 BIOS Setup PC 6170 User’s Manual By SPD Ite m He lp Menu Level f No n -E CC...
  • Page 54 PC 6170 User’s Manual System BIOS Cacheable Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The default value is “Disabled”.

  • Page 55: Integrated Peripherals

    On-Chip Se rial ATA Seri al ATA Po r t0 Seri al ATA Po r t1 IDE HDD Bl ock Mode SBC83810 BIOS Setup PC 6170 User’s Manual Press Enter Press Enter Menu Level f Press Enter Di sabl e...

  • Page 56: Onboard Fdc Controller

    PC 6170 User’s Manual ÇÈ ÆÅ : Mo ve E n te r: S e le ct F 5 : P r evious Values F6: Fail- Saf e D e f a ults F7: O p timize d D e f a ults CMOS Setup Utility-Copyright ©...
  • Page 57 POWER ON Function This option allows users to select the type of power ON sequence for the system to follow. The default value is “Button-Only”. SBC83810 BIOS Setup PC 6170 User’s Manual...
  • Page 58 PC 6170 User’s Manual BUTTON-ONLY Follows the conventional way of turning OFF system power (via power button). Upon selecting this option, the K B POWER ON Password line appears. Press <E nter> and you’ll be prompted to enter and confi rm a password of your Password choi ce.
  • Page 59 PC 6170 User’s Manual ECP Mode Use DMA Select a DMA channel for the parallel port for use during ECP mode. SBC83810 BIOS Setup...

  • Page 60: Power Management Setup

    PC 6170 User’s Manual A.5 Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity. CMOS Setup Utility-Copyright © 1984-2001 Aw ard Softw are...

  • Page 61: Acpi Function

    DPMS ssociation (VESA). Use the software suppl ied for your video subsystem to select video power management values. Blank Screen S ystem only writes blanks to the video buffer. SBC83810 BIOS Setup PC 6170 User’s Manual options available are Enabled,...
  • Page 62 PC 6170 User’s Manual Video Off After As the system moves from lesser to greater power-saving modes, select the mode in which you want the monitor to blank off. The default value is “Standby”. System BIOS will never turn off the screen...
  • Page 63 This option allows the system to resume or wake up upon detecting any ring signals coming from an installed modem. The default value is “Enabled”. IRQ 8 Break Suspend You can turn on or off monitoring of IRQ8 (the Real Time Clock) so it SBC83810 BIOS Setup PC 6170 User’s Manual...
  • Page 64 PC 6170 User’s Manual does not awaken the system from Suspend mode. The default value is “Disabled”. Reload Global Timer Events When Enabled, an event occurring on each device listed below restarts the global time for Standby mode. SBC83810 BIOS Setup...

  • Page 65: Pnp/Pci Configuration Setup

    The options available are Enabled and Disabled. SBC83810 BIOS Setup PC 6170 User’s Manual Di sabled Item He lp Menu Level f...
  • Page 66 PC 6170 User’s Manual Resources Controlled By The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play-compatible devices. If you select Auto, all the interrupt request (IRQ), DMA assignment, and Used DMA fields disappear, as the BIOS automatically assigns them.

  • Page 67: Pc Health Status

    These optional and read-only fields show the current speeds in RPM (revolution per minute) for the CPU fan and chassis fan as monitored by the hardware monitoring IC. SBC83810 BIOS Setup PC 6170 User’s Manual Di sabled Ite m He l p Menu Level f...

  • Page 68: Frequency/Voltage Control

    PC 6170 User’s Manual A.8 Frequency/Voltage Control This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. CMOS Setup Utility-Copyright © 1984-2001 Aw ard Softw are...

  • Page 69: Load Fail-Safe Defaults

    F10 : Save & Exit Setup Load Fail-Safe Defaults To load BIOS defaults value to CMOS SRAM, enter “Y”. If not, enter “N”. SBC83810 BIOS Setup PC 6170 User’s Manual Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Exit Without Saving Ç...

  • Page 70: Load Optimized Defaults

    PC 6170 User’s Manual A.10 Load Optimized Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. CMOS Setup Utility-Copyright © Aw ard Softw are...

  • Page 71: Appendix B Power Supply Specification

    20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading. Power Supply Specification PC 6170 User’s Manual Appendix B R i pp le/ N ois e Ma x 50mV 0.3A...
  • Page 72 PC 6170 User’s Manual LOAD CAPACITY SPECIFICATIONS The cross regulation defined as follows, the voltage regulation limits DC include DC Output ripple & noise. LOAD S T M +3.3V ALL MAX HHHH 4.5A +5V MAX LHLL 0.3A other MIN HLLL +3.3V MAX...
  • Page 73 PC 6170 User’s Manual SHORT CIRCUIT PROTECTION Output short circuit is defined to be a short circuit load of less than 0.1 ohm. In the event of an output short circuit condition on +3.3V, +5V or +12V output, the power supply will shutdown and latch off.

  • Page 74: Environmental Requirements

    PC 6170 User’s Manual TTL signal asserted (high state): greater than 4.75V while sourcing 500uA. High state output impedance: less or equal to 1Kohm from output to common. P O W E R G OOD @ 11 5 / 2 3 0V ,FULL LOA D...
  • Page 75 PC 6170 User’s Manual non-resonant excursions. Plane of vibration to be along three mutually perpendicular axes. SHOCK The subject power supplies will withstand the following imposed conditions without experiencing non-recoverable failure or deviation from specified output characteristics. Storage –40G, 11 mSec. half-sine wave pulse in both directions on three mutually perpendicular axes.

Table of Contents