Advertisement
Safety Instructions
Always completely disconnect the power cord from your chassis whenever you work
with the hardware. Do not make connections while the power is on. Sensitive
electronic components can be damaged by sudden power surges. Only experienced
electronics personnel should open the PC chassis.
CAUTION
Read manual prior to installing the product. The operation of products depends on your
reading and following the information in this manual. Re-check your work prior to
operating the product.
EVENT
EFFECT
Although the brightness is
good under sunlight, it
shines directly all day would
cause the panel damage.
If the product is close to
explosive environment or
such as on fire, the
overheat will cause the
product malfunction.
If the product is close to
the wet ground such as
grassplot, the moisture
between panel and glass
will make the product
malfunction.
PREVENTION
You should avoid exposing
the computer under the
sunlight for whole working
hours.
You should avoid placing
the product near explosive
or firing environment.
You should avoid placing
the product on the ground.
5
Advertisement
