1. Manuals
  2. Brands
  3. protech Manuals
  4. Touch terminals
  5. POS-3150 Series
  6. User manual

protech POS-3150 Series User Manual

Mini pos terminal powered by intel atom platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S
MANUAL
POS-3150 Series CM5
POS-3150 Series
Mini POS Terminal Powered by
®
Intel
Atom™ Platform

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POS-3150 Series and is the answer not in the manual?

Questions and answers

Related Manuals for protech POS-3150 Series

Summary of Contents for protech POS-3150 Series

  • Page 1 USER’S MANUAL POS-3150 Series Mini POS Terminal Powered by ® Intel Atom™ Platform POS-3150 Series CM5...
  • Page 2 Copyright Notice POS-3150 Series POS System With LCD / Touchscreen PREFACE COPYRIGHT NOTICE This user’s manual is meant to assist users in installing and setting up the system. The information contained in this document is subject to change without any notice.
  • Page 3 Copyright Notice FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION About This Manual ............POS System Illustration ..........System Specification ............. Safety Precautions ............CHAPTER 2 SYSTEM CONFIGURATION Jumper & Connector Quick Reference Table ....Component Locations ........... How to Set the Jumpers ..........COM Port Connector ………………………………….

  • Page 5: Table Of Contents

    Contents CHAPTER 4 AWARD BIOS SETUP Introduction ..............Entering Setup ............... The Standard CMOS Features …........The Advance BIOS Features …........Advanced Chipset Features ........... 4-12 Integrated Peripherals ……..........4-15 Power Management Setup ……………………………. 4-22 PNP/PCI Configuration ..........4-24 PC Health Status ……………………………………… 4-26 4-10 Frequency Control ……………………………..……...
  • Page 6 Contents APPENDIX B TECHNICAL SUMMARY Block Diagram ................Interrupt Map ................DMA Channels Map ..............Memory Map ................I/O Map ..................Flash BIOS Update ..............APPENDIX C QUICK MANUAL Assembly Procedure of Advertisement Board ......Assembly Procedure of 2 Display ..........
  • Page 7 CHAPTER INTRODUCTION This chapter gives you the information for POS-3150 Series. It also outlines the system specifications. Sections included: About This Manual POS System Illustration POS System Specifications Safety Precautions Experienced users can jump to chapter 2 on page 2-1 for a quick start.

  • Page 8: Chapter 4 Award Bios Setup

    Chapter 1 Introduction 1-1. ABOUT THIS MANUAL Thank you for purchasing our POS-3150 Series System. The POS-3150 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The POS-3150 provides faster processing speed, greater expandability and can handle more tasks than before.
  • Page 9 2 7 4 . 8 2 3 7 7 . 1 4 Side View 3 0 0 3 1 1 . 3 4 Top View Bottom View 1 2 8 M 3 * 4 1 0 8 ′ Page: 1-3 POS-3150 SERIES USER S MANUAL...
  • Page 10 Chapter 1 Introduction I/O View Quarter View Page: 1-4 ′ POS-3150 SERIES USER S MANUAL...
  • Page 11 5 0 . 4 3 2 7 4 . 8 2 3 7 7 . 1 4 Side View 3 0 0 Top View Bottom View 1 2 8 M 3 * 4 1 0 8 ′ Page: 1-5 POS-3150 SERIES USER S MANUAL...
  • Page 12 Chapter 1 Introduction I/O View Quarter View Page: 1-6 ′ POS-3150 SERIES USER S MANUAL...
  • Page 13 3 x DB-9(COM 1/2/3), 1 x RJ45 (COM4), +5/12V Selectable (COM 1~4) Universal Serial Bus Port: 4 x USB2.0 ports 1 x USB2.0 on side bezel LAN Function: 1 x 10/100/1000 Mbps ′ Page: 1-7 POS-3150 SERIES USER S MANUAL...
  • Page 14 Signal Interface (bit) TTL (24-bit) Touch Panel: 15” 5wire Analog resistive WIRELESS LAN (Optional): Mini PCIe Wireless LAN Module (802.11b/g) MSR (Optional): Hang aside type, JIS-I or II, ISO Tracker 1+2+3 (PS2 Interface) Page: 1-8 ′ POS-3150 SERIES USER S MANUAL...
  • Page 15 Place your POS-3150 on a sturdy, level surface. Be sure to allow enough space around the system to have easy access needs. b. Avoid installing your POS-3150 Series POS system in extremely hot or cold places. c. Avoid exposure to sunlight for a long period of time (for example, in a closed car in summer time.
  • Page 16 If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol and then wipe thoroughly with a dry cloth. d. If dust is accumulated on the case surface, remove it by using a special vacuum cleaner for computers. Page: 1-10 ′ POS-3150 SERIES USER S MANUAL...
  • Page 17 CHAPTER SYSTEM CONFIGURATION Helpful information that describes the jumper and connector settings, and component locations. Sections included: Jumper & Connector Quick Reference Table Component Locations Configuration and Jumper settings Connector Pin Assignments Page 2-1...
  • Page 18 SATA Connector SATA1, SATA2 2-19 SATA Power Connector JPWR_4P1, PWR_4P2 2-19 Touch Panel Connector 2-20 Clear CMOS Data Selection 2-20 Compact Flash Connector 2-21 Printer Connector LPT1 2-22 DC Output Connector 2-23 Page: 2-2 ’ POS-3150 SERIES USER S MANUAL...
  • Page 19 Chapter 2 System Configuration 2-2. COMPONENT LOCATIONS M/B: PROX-A3150LF/N-G1A J24VIN1 POS-3150 Mainboard Front Connector, Jumper and Component locations Page: 2-3 ’ POS-3150 SERIES USER S MANUAL...
  • Page 20 Chapter 2 System Configuration M_PCIE1 POS-3150 Mainboard Rear Connector, Jumper and Component locations Page: 2-4 ’ POS-3150 SERIES USER S MANUAL...
  • Page 21 PIN1 & PIN2 to create one setting and shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 2-5 ’ POS-3150 SERIES USER S MANUAL...
  • Page 22 Chapter 2 System Configuration JUMPER DIAGRAMS JUMPER SETTINGS Page: 2-6 ’ POS-3150 SERIES USER S MANUAL...
  • Page 23 RTS1 CTS1 RI / +5V / +12V selectable COM3: COM3 Connector The pin assignments are as follows: ASSIGNMENT DCD3 COM3 RXD3 TXD3 DTR3 DSR3 RTS3 CTS3 RI / +5V / +12V selectable Page: 2-7 ’ POS-3150 SERIES USER S MANUAL...
  • Page 24 DTR4 DSR4 RTS4 CTS4 RI/+5V/+12 selectable COM1_1: COM1_1 Connector The pin assignments are as follows: ASSIGNMENT DCD2 RXD2 TXD2 DTR2 DSR2 RTS2 CTS2 RI/+5V/+12 selectable COM2 and COM1_1 can't be used simultaneously. Page: 2-8 ’ POS-3150 SERIES USER S MANUAL...
  • Page 25 DDCA CLK DCD2 RXD2 TXD2 DTR2 DSR2 RTS2 CTS2 RI/+5V/+12 selectable All COM port is selectable for RI, +5V or +12V. For more information, please refer to our “COM RI and Voltage Selection”. Page: 2-9 ’ POS-3150 SERIES USER S MANUAL...
  • Page 26 2-5. COM PORT RI & VOLTAGE SELECTION JP_COM1 , JP_COM2, JP_COM3, JP_COM4 : COM Port RI & Voltage Selection The selections are as follows: JUMPER JUMPER SELECTION SETTINGS ILLUSTRATION VCC12 ***Manufacturing Default – RI Page: 2-10 ’ POS-3150 SERIES USER S MANUAL...
  • Page 27 JPS2USB1: Two USB Ports Connector and MINI-DIM MINI-DIN connector can support keyboard, Y-cable. Please use Y-cable if using PS/2 mouse. The pin assignments are as follows: ASSIGNMENT USB2+ USB2- VCC5 USB3+ USB3- VCC5 KDAT MDAT V5SB KCLK MCLK Page: 2-11 ’ POS-3150 SERIES USER S MANUAL...
  • Page 28 ASSIGNMENT LAN1_MDIP0 LAN1_MDIN0 LAN1_MDIP1 LAN1_MDIN1 LAN1_MDIP2 LAN1_MDIN2 LAN1_MDIP3 LAN1_MDIN3 ASSIGNMENT VCC5 USB0- USB0+ VCC5 USB1- USB1+ USB3: Internal USB Ports Connector The pin assignments are as follows: ASSIGNMENT USB5- USB5+ USB7- USB7+ Page: 2-12 ’ POS-3150 SERIES USER S MANUAL...
  • Page 29 Cash drawer control in GPIO port To Open Drawer 1 (GPIO 12) Write "48Dh" to I/O Port "00"h To Close Drawer Write "48Dh" to I/O Port "10"h Detect Drawer1 Status (GPIO 14) Read I/O “48D”h Definition (BIT6) Page: 2-13 ’ POS-3150 SERIES USER S MANUAL...
  • Page 30 Chapter 2 System Configuration 2-9. CASH DRAWER POWER SELECTION JP2: Cash Drawer Power Selection The jumper settings are as follows: JUMPER JUMPER SETTINGS SELECTION ILLUSTRATION +12V (default) +24V *** Manufactory default – +12V Page: 2-14 ’ POS-3150 SERIES USER S MANUAL...
  • Page 31 2-11. EXTERNAL SPEAKER CONNECTOR SPK_OUT1: External Speaker Connector The pin assignments are as follows: ASSIGNMENT SPK_OUT SPK_GND 2-12. Inverter Connector J16: Inverter Connector The pin assignments are as follows: ASSIGNMENT +12V LVDS_BKLTEN BRCTR Page: 2-15 ’ POS-3150 SERIES USER S MANUAL...
  • Page 32 2-13. MSR/ CARD READER CONNECTOR J2: MSR (PS/2 interface) Card Reader Connector The pin assignments are as follows: ASSIGNMENT KB_CLK (Output) KB_CLK_C (Input) KB_DATA_C (Input) KB_DATA (Output) Jumper Setting: Pin1-Pin2, Pin3-Pin4 (Default) Page: 2-16 ’ POS-3150 SERIES USER S MANUAL...
  • Page 33 J15: LVDS connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT LVDS_VCC CLKE- CLKE+ RINE2- RINE2+ RINE1- RINE1+ RINE3+ RINE3- RINE0+ RINE0- CLKO+ CLKO- RINO2+ RINO2- RINO1+ RINO1- RINO0+ RINO0- RINO3+ RINO3- LVDS_VCC LVDS_VCC Page: 2-17 ’ POS-3150 SERIES USER S MANUAL...
  • Page 34 Chapter 2 System Configuration 2-15 Panel Voltage Selection JP4: Panel voltage selection. The jumper settings are as follows: JUMPER JUMPER SETTINGS SELECTION ILLUSTRATION 3.3V 1-3, 2-4 (Default) 3-5, 4-6 *** Manufactory default – 3.3V Page: 2-18 ’ POS-3150 SERIES USER S MANUAL...
  • Page 35 2-16. SATA CONNECTOR SATA1, SATA2: Serial ATA Connector The pin assignments are as follows: ASSIGNMENT 2-17. SATA POWER CONNECTOR JPWR_4P1, JPWR_4P2: Serial ATA Connector The pin assignments are as follows: ASSIGNMENT VCC12 Page: 2-19 ’ POS-3150 SERIES USER S MANUAL...
  • Page 36 To clear CMOS data, user must power-off the computer and set the jumper to “Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal” and power-on the computer. Page: 2-20 ’ POS-3150 SERIES USER S MANUAL...
  • Page 37 Chapter 2 System Configuration 2-20. COMPACT FLASH CONNECTOR CF1: Compact Flash Connector. The pin assignments are as follows: ASSIGNMENT ASSIGNMENT CSJ1 CSJ3 SDIORDJ SDIOWRJ IRQ14 -CSEL RESETJ IORDJ ACKJ CF_LEDJ -PDIAG Page: 2-21 ’ POS-3150 SERIES USER S MANUAL...
  • Page 38 Chapter 2 System Configuration 2-21. Printer Connector LPT1: Printer Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT STBJ ALFJ PDR0 ERRJ PDR1 PAR_INITJ PDR2 SLCTINJ PDR3 PDR4 PDR5 PDR6 PDR7 ACKJ BUSY SLCTJ Page: 2-22 ’ POS-3150 SERIES USER S MANUAL...
  • Page 39 Chapter 2 System Configuration 2-22. DC OUTPUT CONNECTOR J3: DC Output Connector. The pin assignments are as follows: ASSIGNMENT +24VDC Shell Frame GND Page: 2-23 ’ POS-3150 SERIES USER S MANUAL...
  • Page 40 CHAPTER SOFTWARE UTILITIES This chapter provides the detailed information users need to install driver utilities for the system. Sections included: ® Intel Chipset Software Installation Utility VGA Driver Utility LAN Driver Utility Sound Driver Utility Touch Screen Driver Utility Wireless Driver Utility (Optional) Page: 3-1...

  • Page 41: Introduction

    Chapter 3 Software Utilities 3-1. INTRODUCTION Enclosed with the POS-3150 Series package is our driver utilities, which comes in a CD ROM format. Refer to the following table for driver locations. Filename Purpose (Assume that CD ROM drive is D:)
  • Page 42 (depending on your OS platform). Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart the POS-3150 for the changes to take effect. ′ Page:3-3 POS-3150 SERIES USER S MANUAL...
  • Page 43 Chapter 3 Software Utilities 3-3. VGA DRIVER UTILITY The VGA interface embedded with the POS-3150 series can support a wide range of display types. You can have dual displays via CRT and LVDS interfaces work simultaneously. 1. Win XP Series 2.
  • Page 44 Chapter 3 Software Utilities 3-4. LAN DRIVER UTILITY The POS-3150 Series is enhanced with LAN function that can support various network adapters. Installation platform for the LAN driver is listed as follows: 1. Win XP Series 2. Win 7 Series For more details on the Installation procedure, please refer to the Readme.txt file found on LAN Driver Utility.
  • Page 45 (depending on your OS platform). Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart the POS-3150 for the changes to take effect. Page:3-6 ′ POS-3150 SERIES USER S MANUAL...
  • Page 46 Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart the POS-3150 for the changes to take effect. ′ Page:3-7 POS-3150 SERIES USER S MANUAL...
  • Page 47 Wireless driver is located. Click Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart the POS-3150 for the changes to take effect. Page:3-8 ′ POS-3150 SERIES USER S MANUAL...
  • Page 48 CHAPTER AWARD BIOS SETUP This chapter shows how to configure the Award BIOS settings. Sections included: Introduction Entering Setup The Standard CMOS Features The Advanced BIOS Features The Advanced Chipset Features Integrated Peripherals Power Management Setup PNP/PCI Configuration PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Password Setting...
  • Page 49 4-1. INTRODUCTION This chapter will show you the function of the BIOS in managing the features of your system. The POS-3150 Series POS Terminal is equipped with the BIOS for system chipset from Phoenix -Award Software Inc. This page briefly explains the function of the BIOS in managing the special features of your system.

  • Page 50: Entering Setup

    You may use the cursor the up/down keys to highlight the individual menu items. As you highlight each item, a brief description of the highlighted selection will appear at the bottom of the screen. ′ Page: 4-3 POS-3150 SERIES USER S MANUAL...

  • Page 51: The Standard Cmos Features

    < Hour >, < Minute >, and < Second >. Use 24 hour clock format, i.e., for PM numbers, add 12 to the hour. For example: 4: 30 P.M. You should enter the time as 16:30:00. Page: 4-4 ′ POS-3150 SERIES USER S MANUAL...
  • Page 52 LBA (Logical Block Addressing): During drive accesses, the SATA controller transforms the data address described by sector, head and cylinder number into a physical block address, significantly improving data transfer rates. For drives greater than 1024 cylinders. ′ Page: 4-5 POS-3150 SERIES USER S MANUAL...
  • Page 53 Displays the amount of conventional memory detected during boot up. EXTENDED MEMORY: Displays the amount of extended memory detected during boot up. TOTAL MEMORY: Displays the total memory available in the system. Page: 4-6 ′ POS-3150 SERIES USER S MANUAL...

  • Page 54: The Advance Bios Features

    The “BIOS FEATURES SETUP” allow you to configure your system for basic operation. The user can select the system’s boot-up sequence and security. A brief introduction of each setting is given below. ′ Page: 4-7 POS-3150 SERIES USER S MANUAL...
  • Page 55 3.If you are using Windows operating system. Please disable this feature. 3. C1E FUNCTION: This is enabled to reduce power during idle operation. 4. EXECUTE DISABLE BIT: To select enable or disable the No-Execution Page Protection Technology. Page: 4-8 ′ POS-3150 SERIES USER S MANUAL...
  • Page 56 When enabled, the BIOS will shorten or skip some check items during POST. FIRST/SECOND/ THIRD/ OTHER BOOT DEVICE: The BIOS attempt to load the operating system from the devices in the sequence selected in these items. ′ Page: 4-9 POS-3150 SERIES USER S MANUAL...
  • Page 57 Do not type anything and just press <Enter>, it will disable security. Once the security is disabled, the system will boot and you can enter Setup freely. APIC MODE: To Enable Advanced Programmable Interrupt Controller Page: 4-10 ′ POS-3150 SERIES USER S MANUAL...
  • Page 58 This option is only valid for multiprocessor motherboards as it specifies the version of the Multiprocessor Specification (MPS) that the motherboard will use. The MPS is a specification by which PC manufacturers design and build Intel architecture systems with two or more processors. ′ Page: 4-11 POS-3150 SERIES USER S MANUAL...

  • Page 59: Advanced Chipset Features

    The default settings have been chosen because they provide the best opera- ting conditions for the system. The only time you might consider making any changes would be if you discovered that data was being lost while using your system. Page: 4-12 ′ POS-3150 SERIES USER S MANUAL...
  • Page 60 VIDEO BIOS CACHEABLE: This item allows you to enable caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result. ′ Page: 4-13 POS-3150 SERIES USER S MANUAL...
  • Page 61 DVMT Memory Size Select. BOOT DISPLAY: To select the boot-up display type. PANEL NUMBER: This field allows user to decide the LVDS panel resolution PCI SERR# NMI: To Enable/Disable the PCI SERR# interrupt. Page: 4-14 ′ POS-3150 SERIES USER S MANUAL...

  • Page 62: Integrated Peripherals

    If bios setup menu item supports USB device boot, it will cause Win9x detects the same storages twice when the system is rebooted, and USB HDD will fail. Note: this cause just happen under Win9x, the phenomenon is a limitation. ′ Page: 4-15 POS-3150 SERIES USER S MANUAL...
  • Page 63 (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. IDE DMA TRANSTER ACCESS: To Enable/Disable the IDE DMA transfer access. Page: 4-16 ′ POS-3150 SERIES USER S MANUAL...
  • Page 64 [Enhanced Mode]: Enable both SATA and PATA. Max.of 6 IDE drives are supported. [SATA Only]: SATA is operating in legacy mode. PATA IDE MODE: To select PATA IDE Mode sequence. SATA PORT: According PATA IDE Mode to determine SATA sequence. ′ Page: 4-17 POS-3150 SERIES USER S MANUAL...
  • Page 65 ↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Descriptions on each item above are as follows: AUDIO FUNCTION: This item allows you to enable or disable onboard Audio function. Page: 4-18 ′ POS-3150 SERIES USER S MANUAL...
  • Page 66 ECP MODE USE DMA Select a DMA channel for the parallel port for use during ECP mode. ONBOARD SERIAL PORT 3/4: Select an address and corresponding interrupt for the third and forth serial ports ′ Page: 4-19 POS-3150 SERIES USER S MANUAL...
  • Page 67 USB 2.0 CONTROLLER: Enable the USB 2.0 controller. USB OPERATION MODE: This item allows the user to decide USB device operation mode. Page: 4-20 ′ POS-3150 SERIES USER S MANUAL...
  • Page 68 Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB Mouse. USB STORAGE FUNCTION: Enable the USB Storage Function USB FLASH DISK 2.00: Select USB Flash Disk Type. ′ Page: 4-21 POS-3150 SERIES USER S MANUAL...

  • Page 69: Power Management Setup

    ACPI FUNCTION: Users are allowed to enable or disable the Advanced Configuration and Power Management (ACPI). Page: 4-22 ′ POS-3150 SERIES USER S MANUAL...
  • Page 70 This item allows you to select if you want to power on the system after power failure. The choice: Off and On. RESUME BY ALARM: When enabled, you can set the date and time at which the RTC alarm awakens the system from Suspend mode. ′ Page: 4-23 POS-3150 SERIES USER S MANUAL...

  • Page 71: Pnp/Pci Configuration

    Plug and Play-compatible devices. However, this capability means absolutely nothing unless you are using a Plug and Play operating system such as Windows 95. By choosing “manual”, you are allowed to configure the IRQ Resources and DMA Resources. Page: 4-24 ′ POS-3150 SERIES USER S MANUAL...
  • Page 72 F6:Fail-Safe Defaults F7:Optimized Defaults Descriptions on each item above are as follows: IRQ-n Assigned to: You may assign each system interrupt a type, depending on the type of device using the interrupt. ′ Page: 4-25 POS-3150 SERIES USER S MANUAL...

  • Page 73: Pc Health Status

    This item shows you the current CPU temperature. VCORE: This item shows you the current system voltage. 5V /12V: Show you the voltage of 5V/12V. CPU FAN Speed: This item shows you the CPU Fan speed. Page: 4-26 ′ POS-3150 SERIES USER S MANUAL...

  • Page 74: Load Fail-Safe Defaults

    When you press <Enter> on this category, you get a confirmation dialog box with a message similar to the following: Load Optimized Defaults ( Y/N ) ? N Pressing "Y" loads the default values that are factory setting for optimal performance system operations. ′ Page: 4-27 POS-3150 SERIES USER S MANUAL...

  • Page 75: Password Settings

    PASSWORD DISABLED!!! Press any key to continue... Press the < Enter > key again and the password will be disabled. Once the password is disabled, you can enter Setup freely. Page: 4-28 ′ POS-3150 SERIES USER S MANUAL...

  • Page 76: Save & Exit Setup

    You may always call up the setup program at any time to adjust any of the individual items by pressing the <Del> key during boot up. ′ Page: 4-29 POS-3150 SERIES USER S MANUAL...

  • Page 77: Exit Without Saving

    ►Integrated Peripherals word Quit Without Saving (Y/N)? N ►Power Management etup ►PnP/PCI Configura Saving ►PC Health Status Esc : Quit ↑↓→← : Select Item F10 : Save & Exit Setup Abandon all Datas Page: 4-30 ′ POS-3150 SERIES USER S MANUAL...

  • Page 78: Appendix A System Assembly

    APPENDIX SYSTEM ASSEMBLY This appendix contains exploded diagrams and part numbers of the POS-3150 system. Section includes:  Exploded Diagram for POS-3150 Front Panel  Exploded Diagram for POS-3150 Wireless LAN Assembly  Exploded Diagram for POS-3150 Rear Cover  Exploded Diagram for POS-3150 LCD Assembly ...

  • Page 79: Exploded Diagram For Pos-3150 Front Panel

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 FRONT PANEL Type 1 (Black):  Page: A-2 POS-3150 SERIES USER S MANUAL...
  • Page 80 Appendix A System Assembly  Page: A-3 POS-3150 SERIES USER S MANUAL...
  • Page 81 Appendix A System Assembly  Page: A-4 POS-3150 SERIES USER S MANUAL...
  • Page 82 Appendix A System Assembly  Page: A-5 POS-3150 SERIES USER S MANUAL...
  • Page 83 Appendix A System Assembly Type 2 (White):  Page: A-6 POS-3150 SERIES USER S MANUAL...
  • Page 84 Appendix A System Assembly  Page: A-7 POS-3150 SERIES USER S MANUAL...
  • Page 85 Appendix A System Assembly  Page: A-8 POS-3150 SERIES USER S MANUAL...
  • Page 86 Appendix A System Assembly  Page: A-9 POS-3150 SERIES USER S MANUAL...
  • Page 87 Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 WIRELESS LAN CARD ASSEMBLY  Page: A-10 POS-3150 SERIES USER S MANUAL...
  • Page 88 Appendix A System Assembly Q y 　 Component Name Part No. M3_L4_I_B (black) 22-272-30004318 M3_L4_I_Ni (white) 82-272-30004018 POD3150-TOP Assembly MINI_PCIE_DOOR (black) 30-007-28110165 MINI_PCIE_DOOR (white) 30-007-28310165 M2_L4_I_Ni 22-272-20004011 WIRELESS LAN_CARD XX-XXX-XXXXXXXX  Page: A-11 POS-3150 SERIES USER S MANUAL...

  • Page 89: Exploded Diagram For Pos-3150 Rear Cover

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 REAR COVER  Page: A-12 POS-3150 SERIES USER S MANUAL...
  • Page 90 Appendix A System Assembly Q y 　 Component Name Part No. M3_L5_Washer_Ni 22-242-30005311 POD3150 HDD LOCK 80-025-0300118 HDD Assembly M3_L5_Washer_Ni 22-242-30005311 POD3150_INSIDE_TOP_CASE 20-001-03001181 Puller 30-080-04100000  Page: A-13 POS-3150 SERIES USER S MANUAL...

  • Page 91: Exploded Diagram For Pos-3150 Lcd Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 LCD ASSEMBLY  Page: A-14 POS-3150 SERIES USER S MANUAL...
  • Page 92 Appendix A System Assembly Q y 　 No. Component Name Part No. M3_L5_Washer_Ni 22-242-30005311 M5_LI5 22-232-50015011 LCD Assembly  Page: A-15 POS-3150 SERIES USER S MANUAL...

  • Page 93: Exploded Diagram For Pos-3150 Dvd Rom Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 DVD ROM ASSEMBLY With DVD Without Dvd  Page: A-16 POS-3150 SERIES USER S MANUAL...
  • Page 94 Appendix A System Assembly Q y 　 Component Name Part No. M4_L8_Ni 22-242-30005311 VFD Assembly M3_L5_Washer_Ni 22-242-30005311 Jump door 80-047-03001181 M2_L2_1_Ni 22-272-20002011 DVD ROM 52-480-05224905 DVD Cover (black) 30-002-12710181 DVD Cover (white) 30-002-12610181  Page: A-17 POS-3150 SERIES USER S MANUAL...

  • Page 95: Exploded Diagram For Pos-3150 Bottom Cover Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 BOTTOM COVER ASSEMBLY  Page: A-18 POS-3150 SERIES USER S MANUAL...
  • Page 96 Appendix A System Assembly Q y 　 Name Part No. M3_6_FLAT_B 22-215-30060011 INSIDE-TOP-HOLDER 80-029-03001181 M3_L4_I_B (black) 22-272-30004318 HDD Cable 27-012-16504081 DVD Cable 27-008-18105081 DC Cable 27-012-18103111 Open Closed Bushing 30-026-04200008  Page: A-19 POS-3150 SERIES USER S MANUAL...

  • Page 97: Exploded Diagram For Pos-3150 Fan Assembly

    EXPLODED DIAGRAM FOR POS-3150 FAN ASSEMBLY Q y 　 Component Name Part No. Switch Cable 27-019-12804071 LED Cable 27-018-18103071 LED Support 30-014-04100009 Speaker 13-500-08280018 M3_NUT 23-142-30020051 T4.6_L5_Screw XX-XXX-XXXXXXXX Fan Holder 20-029-03001181 40 x 10 FAN XX-XXX-XXXXXXXXX  Page: A-20 POS-3150 SERIES USER S MANUAL...

  • Page 98: Exploded Diagram For Pos-3150 Mainboard Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 MAINBOARD ASSEMBLY  Page: A-21 POS-3150 SERIES USER S MANUAL...
  • Page 99 Appendix A System Assembly Q y 　 Component Name Part No. M3_L5_Washer_Ni 22-242-30005311 Heatsink 21-002-11564002 No.4 BOSS 22-692-40048051 M4_L8_Ni 22-242-40008011 PD-A7510 XX-XXX-XXXXXXXX Thermal Pad 21-006-82020002  Page: A-22 POS-3150 SERIES USER S MANUAL...

  • Page 100: Exploded Diagram For Pos-3150 Bottom Case Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 BOTTOM CASE ASSEMBLY  Page: A-23 POS-3150 SERIES USER S MANUAL...
  • Page 101 Part No. POD3150 I/O Cover (black) 30-002-12910181 POD3150 I/O Cover (white) 30-002-12810181 POD3150-INSIDE-BOX 20-040-03001181 WIRELESS_ANTENNA 27-029-00003072 OPEN CLOSED BUSHING 30-026-04100008 Foot (R1511) 90-004-01100181 UL Label XX-XXX-XXXXXXXX POD3150_BOT_CASE (black) 30-001-12410181 POD3150_BOT_CASE (white) 30-001-12310181  Page: A-24 POS-3150 SERIES USER S MANUAL...

  • Page 102: Exploded Diagram For Pos-3150 Top Cover

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 TOP COVER Q y 　 Component Name Part No. LED Caps (HHP-4F) XX-XXX-XXXXXXXX M3_L4_I_B (black) 22-272-30004318 M3_L4_I_Ni (white) 82-272-30004018 POD3150-TOP-CASE (black) 30-001-12210181 POD3150-TOP-CASE (white) 30-001-12110181  Page: A-25 POS-3150 SERIES USER S MANUAL...

  • Page 103: Exploded Diagram For Pos-3150 Hdd Assembly

    Appendix A System Assembly EXPLODED DIAGRAM FOR POS-3150 HDD ASSEMBLY Q y 　 Component Name Part No. M3_L4_I_B (black) 22-272-30004318 Thermal Pad 21-006-88560001 XX-XXX-XXXXXXXX PS3100_ALU_HDD_HOLDER 20-029-01001165  Page: A-26 POS-3150 SERIES USER S MANUAL...

  • Page 104: Exploded Diagram For Pos-3150 Vfd Cover

    EXPLODED DIAGRAM FOR POS-3150 VFD COVER W i t hout V FD/ W i t hout LO G O W i t h V FD/ W i t hout LO G O  Page: A-27 POS-3150 SERIES USER S MANUAL...
  • Page 105 Appendix A System Assembly Q y 　 No. Component Name Part No. WithoutVFD-COVER (black) 30-002-12310181 WithouVFD-COVER (white) 30-002-12110181 WithVFD-COVER (black) 30-002-12110181 WithVFD-COVER (white) 30-002-12010181 VFD Windows 30-002-02230165 PRON Tape 30-013-24700000 Mini VFD 52-901-17001703  Page: A-28 POS-3150 SERIES USER S MANUAL...
  • Page 106 APPENDIX TECHNICAL SUMMARY This appendix will give you a brief introduction of the allocation maps for the system resources. Sections included: Block Diagram Interrupt Map DMA Channels Map Memory Map I / O Map Flash BIOS Update Page: B-1...

  • Page 107: Appendix B Technical Summary

    Appendix B Technical Summary BLOCK DIAGRAM Page: B-2 ′ POS-3150 SERIES USER S MANUAL...

  • Page 108: Interrupt Map

    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9 Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4 Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8 Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC ′ Page: B-3 POS-3150 SERIES USER S MANUAL...

  • Page 109: Dma Channels Map

    Appendix B Technical Summary DMA CHANNELS MAP DMA Channel Assignment Standard floppy disk controller Direct memory access controller Page: B-4 ′ POS-3150 SERIES USER S MANUAL...

  • Page 110: Memory Map

    System board 0xFFF00000-0xFFFFFFFF System board PCI bus 0xA0000-0xBFFFF Mobile Intel(R) 945 Express Chipset Family 0xA0000-0xBFFFF 0xC0000-0xDFFFF PCI bus 0xE0000-0xEFFFF System board 0xF0000-0xFFFFF System board 0x100000-0x1F6DFFFF System board 0x1F6E0000-0x1F6FFFFF System board 0x1F700000-0xFEBFFFFF PCI bus ′ Page: B-5 POS-3150 SERIES USER S MANUAL...

  • Page 111: I/O Map

    Mobile Intel(R) 945 Express Chipset Family 0x000003C0-0x000003DF Mobile Intel(R) 945 Express Chipset Family 0x000003E8-0x000003EF Communications Port (COM3) 0x000003F0-0x000003F5 Standard floppy disk controller 0x000003F6-0x000003F6 Primary IDE Channel 0x000003F7-0x000003F7 Standard floppy disk controller 0x000003F8-0x000003FF Communications Port (COM1) Page: B-6 ′ POS-3150 SERIES USER S MANUAL...
  • Page 112 0x0000FC00-0x0000FC1F - 27CA Intel(R) 82801G (ICH7 Family) USB Universal Host Controller 0x0000FD00-0x0000FD1F - 27C9 Intel(R) 82801G (ICH7 Family) USB Universal Host Controller 0x0000FE00-0x0000FE1F - 27C8 0x0000FF00-0x0000FF07 Mobile Intel(R) 945 Express Chipset Family ′ Page: B-7 POS-3150 SERIES USER S MANUAL...

  • Page 113: Flash Bios Update

    ► Save & Exit Setup ►PnP/PCI Configurations ► Exit Without Saving ►PC Health Status Esc : Quit : Select Item ↑↓→← F10 : Save & Exit Setup Time, Date, Hard Disk Type .… Page: B-8 ′ POS-3150 SERIES USER S MANUAL...
  • Page 114 Press <ESC> to exit this menu. ↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults (6) Pressing <F10> key to save configuration and exit the BIOS setup menu. ′ Page: B-9 POS-3150 SERIES USER S MANUAL...
  • Page 115 /PY: Stands for answering "yes" to the request concerning the BIOS re-flash. /SN: Stands for answering "no" to the request about saving the previous version of the BIOS.. /R: Stands for the system reset after re-flash. Page: B-10 ′ POS-3150 SERIES USER S MANUAL...
  • Page 116 (C)Phoenix Technologies Ltd. All Rights Reserved For 945GSE-8A79YP6DC-00 DATE: 10/13/2010 Flash Type - File Name to Program : 31501ld1.bin_ Message: Please Wait ! User can restart the system and boot up with new BIOS now. ′ Page: B-11 POS-3150 SERIES USER S MANUAL...

  • Page 117: Appendix C Quick Manual

    APPENDIX QUICK MANUAL This appendix contains the assembly procedure of the advertisement board and the 2 display. Sections included: Assembly Procedure of Advertisement Board Assembly Procedure of 2 Display Page: C-1...
  • Page 118 Appendix C Quick Manual Assembly Procdure of Advertisement Board Packing Checklist: - Transparent Acrylic - Acrylic Bracket - LCD Screw - Body Screw Fabrication Step: Step 4 Step 2 Step 1 Step 3 Page: C-2 ′ POS-3150 SERIES USER S MANUAL...
  • Page 119 Assembly Procdure of 2 Display Packing Checklist: 8.4” LCD Driver CD Power Cable (D-sub 9 to Power Jack) VGA Cable (Twin D-sub 15) LCD Holder (Metal) LCD Fixed Screw LCD Bracket Fixed Screw STEP 1: ′ Page: C-3 POS-3150 SERIES USER S MANUAL...
  • Page 120 Appendix C Quick Manual STEP 2: Page: C-4 ′ POS-3150 SERIES USER S MANUAL...
  • Page 121 Appendix C Quick Manual STEP 3: ′ Page: C-5 POS-3150 SERIES USER S MANUAL...
  • Page 122 Appendix C Quick Manual STEP 4: Page: C-6 ′ POS-3150 SERIES USER S MANUAL...
  • Page 123 Appendix C Quick Manual STEP 5: ′ Page: C-7 POS-3150 SERIES USER S MANUAL...
  • Page 124 Appendix C Quick Manual STEP 6: STEP 7: Page: C-8 ′ POS-3150 SERIES USER S MANUAL...
  • Page 125 Appendix C Quick Manual STEP 8: ′ Page: C-9 POS-3150 SERIES USER S MANUAL...

Table of Contents