Bellfires UNICA-2 40 Instructions For Use & Manual Daily Maintenance page 22

Bellfi res
MODES OF OPERATION
AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
AM
22
Thermostatic Mode
The room temperature is measured and compared
to the set temperature. The fl ame height is then
automatically adjusted to achieve the set
temperature.
Program Mode
PROGRAMS 1 and 2, each can be programmed to
go on and off at specifi c times at a set temperature.
Eco Mode
Flame height modulates between high and low.
If the room temperature is lower than the set
temperature, the fl ame height stays on high for a
longer period of time. If the room temperature is
higher than the set temperature, the fl ame height
stays on low for a longer period of time. One cycle
lasts approx. 20 min.
English
Instructions for use