Bellfires UNICA-2 40 Instructions For Use & Manual Daily Maintenance page 20

Bellfi res
AM
Important: • If you turn on the burner by pressing the
ignite within 10 seconds.
If this does not happen, immediately close the gas tap and
warn the fi tter.
• If the burner ignites with a pop; immediately close the gas
tap and warn the fi tter.
LIGHT / DIMMER OPERATION (Option)
AM
Note:
The Light works independently of the Pilot fl ame. If you want the light on but no fl ame,
press button. If the main burner and pilot light are switched off, with
light will switch off automatically.
20
Flame height directly to maximum position
• Pressing the
increases the fl ames to the high position.
This is indicated by "
2x
Note: Backlight must be on for high fi re and
low fi re double-click operation!
ON
• Press button.
• displayed.
• Light is on at preset level.
OFF
• Press button.
• disappears.
SETTING
• Press button and hold until
• To adjust light between 20...100 % press
button.
• To confi rm setting either press
wait.
• displayed.
button twice automatically
" on the display.
button, it must
fl ashes.
button or
button, the
Instructions for use
English
or