Table of Contents
Advertisement
Picco R32
Heat pumps inverter air/water with axial fans
IT IS PROHIBITED:
To remove and/or to tamper with any safety device.
For unauthorised personnel to access the electric panel.
To work on live systems.
To touch the systems if not authorised to do so
To allow children or unassisted disabled persons to use the appliance.
To touch the appliance when barefoot or parts of the body are wet or damp.
To perform any cleaning operation when the master switch is 'ON'.
To pull, detach or twist the appliance's electric cables.
To step on, sit down on and/or place any type of object on the appliance.
To spray or pour water directly on the unit.
To dispose of, abandon or leave within reach of children packaging materials (cardboard, staples, plastic bags, etc.) as they
may represent a hazard for the environment and one's life.
To tamper with or replace parts of the unit without the specific consent of the manufacturer. The manufacturer shall have no
responsibility whatsoever in case of unauthorised operations.
CAUTION:
Refer to the user-installer manual which accompanies the unit before proceeding.
All the operation described below must be done by QUALIFIED PERSONNEL ONLY.
The electrical wiring to the terminal blocks has to be done only by qualified personnel.
Any routine and/or extraordinary maintenance operation must be carried out with the machine stopped and disconnected.
Do not place your hands or introduce screwdrivers, spanners or any other tools on moving parts.
The machine operator and maintenance personnel must receive suitable training for the performance of their tasks in safety.
Only authorised personnel are allowed to have access to the electric panel.
Operators must know how to use personal protective equipment and the accident-prevention rules of national and interna-
tional laws and regulations.
The operator's workplace has to be kept clean, tidy and clear of objects that may hinder free movement. Appropriate lighting
of the work place shall be provided so as to allow the operator to carry out the required operations safely. Poor or excessive
lighting can cause risks.
Ensure that work places are always adequately ventilated and that the extraction systems are working, in good condition and
in compliance with the requirements of the laws in force.
Not all of the configurations described can be activated and/or modified at the same time.
Values other than the default values can jeopardise proper operation of the unit. If in doubt on which value to set, contact
our headquarters.
The company excludes any contractual and extra contractual liability for damage caused to persons, animals or objects, by
incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the
information contained in this manual.
7
Advertisement
Table of Contents
