Trane Picco R3206A Manual page 27

• Climatic compensation;
• Booster circulator management;
• Management of single pump in a network;
• Alarm diagnostic system.
For further information, see the user-installer manual, or contact our headquarters.
12. FUNCTIONS THAT CAN BE ACTIVATED WITH GI MODULE (OPTIONAL)
The Gi module is an optional kit which allows you to manage the following functions:
• Booster circulator management with the aid of a room thermostat (not supplied);
• Management of a plant side mixer valve both in heating and cooling mode;
• Solar – thermal integration management.
For further information, see the "Picco R32 GI module" manual.
13. TABLES OF PERMITTED SETUPS FOR USER AND INSTALLER
CAUTION
All the operations with INSTALLER visibility must be carried out by QUALIFIED PERSONNEL.
Not all of the configurations can be activated and/or modified at the same time.
Values other than the default values can jeopardise proper operation of the unit. If in doubt on which value to set, contact
our headquarters.
The company excludes any contractual and extra contractual liability for damage caused to persons, animals or objects, by
incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the
information contained in this manual.
We shall not be held liable for any breakage or malfunctioning caused by third parties changing the default parameters if not expressly autho-
rised to do so.
The following is the table of the allowed configurations; not all of them can be selected simultaneously.
Values other than the default values can jeopardise proper operation of the unit. If in doubt on which value to set, contact our headquarters.
Picco R32
Heat pumps inverter air/water with axial fans
27