Table of Contents
Advertisement
SETPOINT
**rHEA
(*) If the DHW function is enabled, see par. 10.2
(**) If Gi accessory is included, access is only possible with installer password.
5.3 PASSWORD MENU [PSS]
Enter the password according to the desired access level. Confirming the value automatically activates the access level and the items of the
menus enabled at that level will appear.
5.4 PROBES MENU [tP]
The value of the different probes appears. The number of visible probes depends on whether or not the I/O expansion modules are present.
Particular situations:
• Err = probe faulty
• --- = probe not used (no function associated to that probe)
Entering the "tP" analogue inputs menu with the installer password allows you to read the values of the probes present:
tP
t01
t02
t03
t04
t05
*t06
*t07
t09
t10
t11
**t15
**t16
**t17
(*) If enabled
(**) If Gi accessory present and enabled.
Please note that the menu is password-protected.
5.5 ALARMS MENU [Err]
This menu is only displayed if there are triggered alarms. All of the active alarms can be seen.
5.6 DIGITAL INPUTS MENU [Id]
The status of the digital inputs are displayed:
0=deactivated
1=active
----=input not configured
Please note that the menu is password-protected.
5.7 PARAMETERS MENU [Par]
The parameters are gathered into groups. Each group is identified by a three-digit code, while the index of each parameter is preceded by a
letter.
DESCRIPTION
Configuration
Compressor
Alarms
Regulation
Pump
Electric heaters
Defrost
Hz min / max
*Solar
10
DESCRIPTION
Mixing valve Winter setpoint
DESCRIPTION
Inlet water temperature
Outlet water temperature
Compressor intake temperature
Compressor discharge temperature
Outdoor air temperature
DHW probe temperature
Plant remote probe temperature
Low pressure
High pressure
Water flow
Mixer probe temperature
Solar storage tank probe temperature
Solar collector probe temperature
IDENTIFICATION CODE OF THE
GROUP
CnF
CP
ALL
rE
PUP
Fro
dFr
LbH
SUn
Picco R32
Heat pumps inverter air/water with axial fans
UNIT
DEFAULT
°C
30.0
Unit of measurement
PARAMETER INDEX
H01-
C01-
A01-
b01-
P01-
r01-
d01-
L0-
S01-
RANGE
0.0 ÷ 80
°C
°C
°C
°C
°C
°C
°C
(bar)
(bar)
(l/min)
°C
°C
°C
VISIBILITY
INSTALLER
INSTALLER
INSTALLER
INSTALLER
INSTALLER
INSTALLER
INSTALLER
INSTALLER
INSTALLER
Advertisement
Table of Contents
