Safety Instructions; Installation Requirements - Faber e-MatriX 800-RD Manual

Manual e-MatriX 800-RD/ST (LL)
--------------------------------------------------------------------------------------------------------------------------------------
1 General
1.1 Introduction
Only have the fire installed by a qualified installer according to the water and electric safety
regulations. Read this installation manual properly.
1.2 Check

Before installation, check the fire for transport damage and report immediately to your
supplier.

Check whether all of the parts below are included:
o Control box
o Remote
o Decoration material
o Suction cups (2x)
o Service door
o Spare transducers (2x) and absorption pill
1.3 CE declaration
Product: electric fire Opti-myst
Model: e-MatriX 800/500 RD, ST
e-MatriX 800/500 RD, ST LL (Large Logs)
The product complies with the European Safety Standards EN60335-2-30 and the European
Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 these cover
the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC.
!! This declaration is invalid if changes are made to the fire.

2 Safety instructions


Do not use outdoors.

Do not use in the immediate surroundings of a bath, shower or swimming pool.

Do not use without the glass installed in place.

The fire must be installed according this manual.

3 Installation requirements

3.1 Water supply

Water connection ½" or ¾" placed at an accessible location.

Water pressure on the fire between 0,5 and 8Bar. Where required, use a pressure reducing
valve.
3.2 Power supply

Electric connection -230VAC/50Hz earthed and placed at an accessible location.
10 < < < <