Page 5
Installation manual e-MatriX 800/1600 ST A = EA non-return valve F = Mesh filter 1 = Safety clip (11x) B = ½ or ¾ ”connector G = In-line (fine) filter 2 = Brackets (2x) in-line filter C = ¼ ”1m pipe...
Dear user Product: electric fire Opti-myst. Model: e-MatriX mood 800/1600 ST Congratulations on your purchase of a Faber fire! A quality product from which you will experience This declaration will become null and void as soon warmth and atmosphere for many years. We rec-...
Page 10
Installation manual e-MatriX 800/1600 ST Control box (see fig. 1.3) Water inlet Connect the water supply pipe to the (inlet) water connection of the control box (see dimensional Please note! drawing 10.2). Fix the Control box at an accessible location...
Page 11
Installation manual e-MatriX 800/1600 ST Remove the decoration set; The e-MatriX needs a minimum ventila- tion of 210cm² underneath the fire. Lift the bottom plate in the middle and let it rest carefully at the front of the fire. See Glass doors fig.
Installation manual e-MatriX 800/1600 ST Pebbles/Acrylic ice Disconnect the “fill cap” by turning it clockwise, see fig. 6.1. Spread an even amount of Pebbles or Acrylic-ice on Disconnect the transducer cable, see fig. the bottom plate. 6.2. Release the clip on both sides and remove Functional test the nozzle, see fig.
Page 13
Installation manual e-MatriX 800/1600 ST Replacing in-line filter 1. Take out the sponge. Turn off the water supply. 2. Fix the cause of the water leakage and re- Close the ball valves. move any water at the bottom of the en- Replace the filter.
Page 14
Installation manual e-MatriX 800/1600 ST Dimensional drawings 10.1 e-MatriX 800/1600 ST 14 < < < <...
Page 15
Installation manual e-MatriX 800/1600 ST 10.2 Control box 15 < < < <...
Page 16
Installation manual e-MatriX 800/1600 ST 10.3 Remote access door (article number 20879500) 16 < < < <...
Need help?
Do you have a question about the e-MatriX 800 and is the answer not in the manual?
Questions and answers