Switching Grind mode / Welding mode ........................2 How to replace battery (For Replaceable Battery Version Only) ................. 3 Before using the filter: ............................... 3 Range of use for the SAVAGE A40 ..........................3 Setting the delay ............................... 3 Spare parts SAVAGE A40 ............................3 Filter Testing: ................................
SAVAGE A40 welding helmets afford reliable protection for the eyes whilst electric arc welding. They offer permanent protec- tion against UV/IR rays, heat & sparks in any state from the clear to dark. The protection shades of the SAVAGE A40 welding helmets have been chosen to avoid eye damage caused by the welding arc.
They should never be used as sunglasses when driving as this On the SAVAGE A40 set the shade by turning the knob on could lead to incorrect identification of the color of traffic the outside of the helmet (pos.
0.1 second. If the ADF does not react in this way, then there Range of use for the SAVAGE A40 is an issue with the delay function. All arc welding applications with the exception of TIG<5A.
Lindholmsallén 9 Box 8004 402 77 Gothenborg Sweden Tel: +46 (0) 31 50 90 00 www.esab.com ESAB AB operates a policy of continuous improvement. We therefore reserve the right to make changes and improvements to any of our products without notice.
Need help?
Do you have a question about the SAVAGE A40 and is the answer not in the manual?
Questions and answers
Как разобрать регулятор затемнения? Варил на улице. Видимо в регулятор попала вода. Как его разобрать, проверить, почистить?