Apex Digital CloudPower Series Operation Manual page 29

Notes On Networking
Going wireless
Using wireless networks may be challenging, but the key to success is to use good quality rugged wireless
access points and to configure them correctly.
Configuring an access or router point is not that difficult. There is no requirement to install any software as
the computer's web browser is sufficient (all access points have a built-in web-server). Just type in the IP
address of your access point into your web browser and you'll be able to configure the device.
In some applications, there may be a requirement to boost the signal level of both the access point and
computer (outdoor stadium shows for example). External boosters are available but these will require that
the original antenna of the access point or computer be removed (this has a bearing on the type of access
point chosen). Note: always check local regulations concerning maximum permitted wireless signal power
before up-rating your equipment.
29