Cloud; Network; About - Apex Digital CloudPower Series Operation Manual

Settings / Network
The Network menu gives access to the IP setting of the CloudPower™️ which can be set from the front
panel by navigating to Settings > Network.
Connect via a router
Connect the CloudPower™️ device's
is mandatory in DHCP mode to obtain IP addresses. After a connection is established with the router, the
CloudPower™️ device will receive an IP address that will be displayed in the network menu. Enter this address in
your device's browser, and the IntelliCloud software will open on your device. The IntelliCloud software is web-
based, so there is no need for software installation.
Press return
to
apply the changes.
Settings / About
The About menu will display the current firmware version of the device.
You can access this menu by navigating to Settings > About.
connector together with a PC to a router. The use of a router
CONTROL
Mode
Use the rotary encoder to choose between
IP
In DHCP mode, an IP address will be automatically displayed when a
connection is established with the router.
In static mode, you need to manually enter an IP address.
Subnet
For DHCP mode, the subnet will also be automatically displayed when
the connection is established.
In static mode, you must manually enter the subnet mask.
Front Panel Operation
and Static modes.
DHCP
27