Table of Contents
Advertisement
Maintenance and Upgrade
Warning
Step 1
Remove the drive that you are replacing:
a) Press the release button on the face of the drive tray.
b) Grasp and open the ejector lever and then pull the drive tray out of the slot.
Figure 32: Remove the Drive
1
Step 2
Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray.
This unit might have more than one power supply connection. To reduce risk of electric shock, remove all
connections to de-energize the unit.
Ejector handle
2
Release button
Cisco Secure Endpoint PC4000 Hardware Installation Guide
Remove and Replace a Drive
37
Advertisement
Table of Contents
