Table of Contents
Advertisement
Rear Panel
9
Rear Panel
The following figure shows the rear panel of the Secure Endpoint PC4000.
Figure 6: Rear Panel
1
3
5
7
9
Cisco Secure Endpoint PC4000 Hardware Installation Guide
8
Temperature status
• Green—The appliance is operating at
normal temperature.
• Amber—One or more temperature
sensors breached the critical
threshold.
• Amber, flashing—One or more
temperature sensors breached the
unrecoverable threshold.
PCIe riser 1 (PCIe slot 1, 2, 3)
PCIe slot 3 is used for the SFP+ ports.
PCIe slots 1 and 2 are not supported.
2.5-inch HDD bays populated by 3.8 TB
SSDs for the recovery partition
Threaded holes for dual-hole grounding
lug
2 USB 3.0 Type A ports
VGA video port (DB-15 connector)
2
PCIe riser 2 (PCIe slots 4, 5, 6)
PCIe riser 2 is not supported.
4
Power supplies (two, redundant as 1+1)
6
Modular LAN-on-motherboard (mLOM)
card slot (x16)
8
Dual 1-Gb/10-Gb Ethernet ports (LAN1
and LAN2)
The dual LAN ports can support 1 Gbps
and 10 Gbps depending on the link partner
capability.
1-Gb Ethernet dedicated Cisco Integrated
10
Management Controller (CIMC) port
Overview
Advertisement
Table of Contents
