Electronic Journal View; Training Mode - Sharp ER-A247 Instruction Manual

Electronic Journal View
The transaction data is kept in the electronic journal memory.
To display the journal data, press the
To retroact to past transaction data, press the
To exit the electronic journal view, press the
TRAINING Mode
The training mode is used when the operator or the manager practices register operations.
When a clerk set in training is selected, the register automatically enters the training mode, while a clerk
not set in training is selected, the register automatically enters the ordinary REG mode. A training text and a
training clerk can be programmed.
The training operations are valid in all modes.
A mark which is identifying a training receipt is printed on the receipt which is issued in the training mode.
The consecutive number is not updated. The preceding number is repeated in printing.
Training clerk programming is performed in PROGRAM mode. (It allows only for one-clerk.)
The memory in clerk is updated in the training mode. Other memories are not updated.
The reading and resetting of training clerks is printed on the clerk reports. However, the sales total of training
clerks is not included in the clerk total on the full clerk report.
Example
Selecting the
clerk set in
training
key, the last transaction data is displayed.
f
f
f
f
a
Key operation
5 p
3 @
3 p
A
key repeatedly.
key.
Print
31