Eft Test Function - Sharp ER-A247 Instruction Manual
Electronic cash register
Hide thumbs
Also See for ER-A247:
- Instruction manual (213 pages) ,
- Manuel d'instructions (109 pages) ,
- Instruction manual (109 pages)
Table of Contents
Advertisement
EFT Test Function
The EFT Test function appears only when the RS port is programmed to "EFT" in "Device Configuration
Programming".
Use the following procedure to perform the EFT test function.
Procedure
When the EFT terminal (CREDIT CARD terminal) is not connected, the EFT test function causes
NOTE
an error.
92
1.
Press the
key and select the "6 PROGRAM MODE" and
j
press the
A
select "3 EFT TEST" and press the
TEST window will appear.
2.
Press the
A
key. In the "PROGRAM MODE" window,
A
key to perform the test function.
key, The EFT
Advertisement
Table of Contents
