Replacing The Paper Roll; Recording Paper Specifications; Installing The Paper Roll - Sharp ER-A247 Instruction Manual

Replacing the Paper Roll
■ Recording paper specifications
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.
Paper specification
Paper width:
Max. outside diameter: 80 mm
Quality:
• Be sure to set a paper roll prior to using your register, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
(How to set the paper roll)
Incorrect
■ Installing the Paper Roll
The register can print receipts. For the printer, you must install the paper roll provided with the register.
Print roller arm
57.5 ± 0.5 mm
High quality (0.06 to 0.08 mm thickness)
To the printer
(How to cut the paper end)
To the printer
Correct Correct
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Set a paper roll in the paper roll cradle as per the diagram.
Incorrect
99