Advertisement
Disinfecting the Restraints
Ferno recommends that you visually inspect the restraints
each time you disinfect them.
1. Remove restraints from chair.
2. Spray or wipe buckles and all surfaces of webbing
with disinfectant. Follow the disinfectant
manufacturer's instructions for contact time.
Cleaning the Restraints
1. Remove restraints from chair and buckle them.
2. Place restraints inside a mesh bag (not provided).
3. Wash restraints in the washing machine using warm
water, a mild detergent, and gentle agitation. Do
not use bleach.
4. Remove restraints from mesh bag and hang to dry.
Do not put restraints in a dryer.
5. Reattach clean, dry restraints to the chair.
Ferno Customer Relations
Customer service and product support are important
aspects of each Ferno product. For information, please
contact Ferno Customer Relations:
Telephone (Toll-free) ........................... 1.877.733.0911
Telephone (Global) .............................. 1.937.382.1451
Fax (Toll-free) .................................... 1.888.388.1349
Fax (Global) ........................................ 1.937.382.6569
Internet .............................................. www.ferno.com
4
Inspecting the Restraints
The restraints require inspection at regular intervals. Set
up and follow an inspection schedule.
To inspect restraints, attach them to the chair, work them
through their functions as described in Using the
Restraints, and follow the checklist below. Ferno
recommends also inspecting the restraints for visible
damage each time you disinfect them.
If inspection shows damage or excessive wear, remove
the restraints from service and destroy them to prevent
accidental use.
INSPECTION CHECKLIST
Are all components present?
Is restraint webbing in good condition with no cuts
or frayed edges?
Are restraint buckles free of visible damage?
Do buckles open and close smoothly and fasten
securely?
Do straps adjust smoothly and properly?
Limited Warranty Statement
The products sold by Ferno are covered by a limited
warranty. The actual terms and conditions of the limited
warranty, and the limitations of liability and disclaimers,
are available upon request by calling 1-800-733-3766 or
1-937-382-1451.
© Ferno-Washington, Inc. 234-3322-00 June 2005
Advertisement
