Adjusting The Control Arm Position; Remove The Shipping Blocks And Pins - Toro 30864A Operator's Manual

1. Step
2. Raise or lower the step to the desired height
and re-secure the brackets to the frame with the
2 bolts and nuts.
3. Repeat the procedure on the other step.
3
Adjusting the Control Arm
Position
No Parts Required
Procedure
The control arm position can be adjusted for the
operators comfort.
1. Loosen the 2 bolts securing the control arm to
the retaining bracket
Figure 2
2. Step brackets
(Figure 3).
g003959
1. Control arm
2. Retaining brackets
2. Rotate the control arm to the desired position
and tighten the 2 bolts.
4
Remove the Shipping
Blocks and Pins
No Parts Required
Procedure
1. Remove and discard the shipping blocks from
the cutting decks.
2. Remove and discard the shipping pins from the
cutting deck suspension arms. The shipping
pins stabilize the cutting decks during shipping
and must be removed before operation.
13
Figure 3
3. Bolts (2)
g004152