Table of Contents
Advertisement
Daily Maintenance Checklist
Duplicate this page for routine use.
Maintenance Check Item
Check the safety interlock operation.
Check the brake operation.
Check the engine oil and fuel level.
Drain the water/fuel separator.
Check the air filter restriction indicator.
Check the radiator and screen for debris.
Check unusual engine noises.
Check unusual operating noises.
Check the hydraulic system oil level.
Check the hydraulic filter indicator.
Check hydraulic hoses for damage.
Check for fluid leaks.
Check the tire pressure.
Check the instrument operation.
Check the Height of Cut adjustment
Check Condition of Blades
Check all grease fittings for lubrication.
Touch-up damaged paint.
1. Check the glow plug and injector nozzles if hard starting, excess smoke, or rough running is noted.
2. Check with the engine running and the oil at operating temperature
3. Immediately after every washing, regardless of the interval listed
Notation for Areas of Concern
Inspection performed by:
Item
Date
1
2
3
4
5
6
7
8
Important:
Refer to your Engine Operator's Manual for additional maintenance procedures.
Note:
Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy
of the schematic by visiting www.Toro.com and searching for your machine from the Manuals link on the
home page.
For the week of:
1
2
3
Information
Mon.
Tues.
Wed.
41
Thurs.
Fri.
Sat.
Sun.
Advertisement
Table of Contents
