Specifications; Cutting Unit Specifications; Attachments/Accessories - Toro 30864A Operator's Manual

To Set the Counterbalance
•
In the Settings Menu, scroll down to
Counterbalance.
•
Press the right button to select counterbalance
and change between the low, medium, and high
settings.

Specifications

Note:
Specifications and design are subject to change without notice.
Transport Width
Width of cut
Length
Height
Fuel tank capacity
Transport speed
Mowing speed
Net weight*
* With cutting decks and fluids

Cutting Unit Specifications

Length
Width
Height
Weight

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a
list of all approved attachments and accessories.
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, & 30S.
226 cm (89 inches)
229 cm (90 inches)
320 cm (126 inches)
218 cm (86 inches)
51 liters (13.5 US gallons)
0–16 kph (0–10 mph)
0–13 kph (0–8 mph)
1,492 kg (3,289 lb)
86.4 cm (34 inches)
86.4 cm (34 inches)
24.4 cm (9.6 inches) to carrier mount
26.7 cm (10–1/2 inches) at 3/4 inch height of cut
34.9 cm (13–3/4 inches) at 4 inch height of cut
88 kg (195 pounds)
21