1
Installing the Decals (CE
Machines Only)
Parts needed for this procedure:
1
Warning decal
1
CE decal
Procedure
•
On machines requiring CE compliance, install the
warning decal included in the loose parts over the
existing decal
(Figure
•
Install the CE decal next to the serial number plate
on the machine
(Figure
1. Warning decal
3).
3).
Figure 3
2. CE decal
2
Adjusting the Control Arm
Position
No Parts Required
Procedure
You can adjust the control arm position for your
comfort.
1.
Loosen the 2 bolts securing the control arm to
the retaining bracket
1. Control arm
2. Retaining brackets
g276200
2.
Rotate the control arm to the desired position
and tighten the 2 bolts.
11
(Figure
4).
Figure 4
3. Bolts (2)
g031681