Application <Weighing; Application-Specific Settings - KERN 572 Operating Instructions Manual

10 Application <Weighing>
How to carry out a simple weighing and taring, please refer to chap. 8.2 or 8.4.
Further specific settings you will find in the following chapters.
Shouldn't the application <Weighing> already be enabled, select the menu
setting < mode >  < weih >, see chap. 9

10.1 Application-specific settings

Call up menu:
Press the TARE key and hold it until < apcmen> is displayed.

The display changes to < wghmod> followed by < Ptare>.


Navigation in menu see chap. 13.1
Overview:
Level 1
Ptare
PRE-TARE
hold
Unit
Units
mode
Applications
T572-A-BA-def-2311
Level 2 Level 3
Take over the placed weight as PRE-TARE value, see chap.
actuAl
10.2.1
manuAl
Numerical input of the tare weight, see chap. 10.2.2
CLEAR
Delete PRE-TARE value
-
Start-Hold function, see chap. 10.3
available weigh-
This function defines in which weighing unit the result will be
ing units, see
displayed, see chap. 10.4.1
chap. 1
Application unit counting
pcs
FFA Multiplication factor see chap. 10.4.2
Application unit for determining percentages
%
see chap. 10.4.3
mol Molar weighing mode, see chap. 10.4.4
wei h
Weighing
count
Counting
check
Check weighing
Description / Chapter
see chap. 9
31