Operation; Safety Instructions - KERN HFM 1T0.1 Operating Instruction

5. Operation

5.1

Safety instructions

(Example)
HFM-BA-e-2215
Risk of injury due to falling loads!
DANGER
 Always work with particular care according to the general
rules for crane operation.
 Check all parts (hook, eyelet, rings, rope slings, cables,
chains etc.) for excessive wear or damage
 If faults can be seen on the safety bracket of the hook
or if it is missing completely, the scales must not be
used.
 Work only with appropriate speed.
 Always avoid vibrations and horizontal forces. Avoid
any kind of shock, torsion and oscillating (e.g. caused
by inclined suspending).
 Do not use the crane scales for transport of loads
 Do not stand or go under suspended loads.
 Do not use on building sites.
 Suspended loads have to be observed constantly.
 Do not exceed the nominal load of crane, crane scales
or any kind of load attachment devices at the crane
scales.
 For weighing dangerous goods (e.g molten masses,
radioactive materials)
Regulations" are to be regarded!
the "Dangerous Goods
19