7. Adjustment
Switch-off balance and attach a carrying help if necessary.
Switch-on balance with attached carrying help and during the selftest press the
ZERO and the
Use the number keys to enter password:
or
select standard password „0000" with HOLD number, increase the flashing
number using
or
personal password, see function F8 ci
Confirm with ZERO button, the first function „F0 di" is displayed.
Press the
Press the ZERO button, „UnLD" will be displayed.
Unload the balance and wait until the LED
Press the ZERO button, the currently set adjustment weight is displayed.
In order to change, select the number to be changed using the HOLD button and
set the desired value using the
flashes.
Confirm by the ZERO button, „Load" will be displayed.
Attach the adjustment weight and wait until the LED
Press the ZERO button.
After successful adjustment the balance carries out a selftest, then it
automatically returns to weighing mode.
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure
HFM-BA-e-2215
button at the same time. „P1 - - - "is displayed.
button repeatedly until „F9 CAL" will be displayed.
button, the respective active digit
lights up.
lights up.
27