Specifications - Solid State Logic PURE DRIVE OCTO User Manual

Specifications

Default test conditions (unless otherwise stated):
Source impedance of test set: 40Ω
Input impedance of test set: 100 kΩ
Reference frequency: 1 kHz
Reference level: 0 dBu
All unweighted measurements are specified as 20 Hz to 20 kHz bandwidth limited, expressed in dBu.
Onset of clipping (for headroom measurements) should be taken as 1% THD.
All levels are intended balanced, unless explicitly defined otherwise.
ADC sample rate 48 kHz
HPF disabled/set to minimum
TRIM set to center position (0 dB)
Gain set to minimum
Z set to highest (green)
DRIVE disabled
Unless otherwise quoted all figures have a tolerance of ±0.5dB or 5%.
Unit General
Power
Power Supply
Operating Power
Standby Mode
Physical
Width
Height
Depth
Weight
Boxed Dimensions
Connectors
Inputs
Outputs/Insert Sends
Insert Returns & Line Inputs
AES/EBU Outputs
ADAT Output and ADAT Link In
Wordclock Input and Output
USB
PURE DRIVE OCTO User Guide
Auto-Ranging 100-240 VAC
< 45 Watts
< 6.9 Watts
482.6 mm / 19 inches
88.1 mm / 3.5 inches (2 RU)
302.8 mm / 11.9 inches (chassis only)
338.4 mm / 13.3 inches (including front panel controls and rear
panel connections)
6.2 kg / 13.7 lbs
550mm x 470mm x 210mm (21.7" x 18.5" x 8.3")
Combo XLR x4
Male XLR x4
25-way D-type Female (D-Sub) x1
Male XLR x2
Optical TOSLINK Port x2
BNC connector x 2
'C' Type USB Port x1
Appendices
27