Table of Contents
Advertisement
Settings Mode & Factory Reset
Factory Reset
To return the unit to the factory-shipped state, you can perform a factory reset by following these instructions:
•
During unit power up, press and hold both the Channel 1 ZΩ button and Channel 8 DRIVE buttons until all the DRIVE buttons
flash red.
•
Release the held buttons and the unit will reboot automatically with factory settings restored.
Press and hold both Channel 1 ZΩ and Channel 8 DRIVE buttons during boot to trigger
Settings affected by Factory Reset:
•
Switch states
•
Shaft switch states
•
Buttons Brightness (default: 5th level of 8)
•
Meters Brightness (default: 8th level of 8)
•
Relay feedback (default: ON)
•
Autopower on (default: enabled)
•
Auto Standby Mode (default: disabled)
•
Auto Standby Mode timeout (default: 20 min)
24
a factory reset.
PURE DRIVE OCTO User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the PURE DRIVE OCTO and is the answer not in the manual?
Questions and answers