Settings; Settings Layout - Overview Map - Solid State Logic PURE DRIVE OCTO User Manual

Settings Mode & Factory Reset

Settings

There are a number of configurable settings available for PURE DRIVE OCTO.
To access these, hold down the CLK button whilst the unit is powering on.
Enter Settings mode
Read through the information on the following pages to understand which switches affect which
particular setting.
When you are finished adjusting settings, press and hold STANDBY button and the unit will
power cycle back into the normal operating mode.
Exit Settings mode

Settings Layout - Overview Map

Below is a quick way of identifying which controls/buttons affect each setting, at a glance.
PURE DRIVE OCTO User Guide
19