Bar. Clean the nose wheel and running path for dirt.
Turn if necessary the bar in order to spread the wear.
A worn bar can be dangerous to use and should be
replaced.
Chain. The chain should be filed on a regular basis
to obtain the best result.
1) Make sure the bar is tightened properly
2) Use a 4,8 mm (3/16") file
3) File all teeth down with 3-4 stroke, so that they are
even - as shown on the drawing
4) It is necessary to inspect the height of the teeth on
a regular basis, if they are too high, they should be filed.
Maintenance:
Part
Screws / bolts
Check / tighten
Air filter
Clean / replace
Fuel filter
Replace
Sword / driving
Clean
wheel
Sparking plug
Clean/adjust/replace
Fuel hose
Check
Replace
Chain brake
Check
Replace
17. Storage
1. Empty the fuel tank
2. Start the machine and let it run till all fuel has been used
3. Let the machine cool
4. Unscrew the sparking plug
5. Pour 1 teaspoonful of 2-stroke oil in the sparking plug gap
6. Pull the starting cord easily 2-3 times, thereby the oil is distributed in the machine.
7. Remount the sparking plug safely and place the sparking plug cap back in its place
8. Store the chain saw in a dry area
After every use
X
X
X
www.texas.dk
After every
After every
10th running
20th running
hour
X
If necessary
If necessary
hour
X
X
X
33