3. Identification
1. Hand protector (chain brake)
2. Start handle
3. Air filter
4. Choke
5. Safety button
6. Rear handle
7. Throttle control
8. Ignition switch start/stop
9. Gasoline cover
10. Chain oil cover
11. Front handle
12. Saw chain
13. Bar
4. Symbols on machine
a) For fuel (oil-mixed gasoline)
b) For chain oil
c) Ignition switch for start/stop
Position up = Start
Position down = Engine stops
d) If the buttons is pulled, choke is applied
e) Adjustment of chain oil amount:
MAX = Chain lubrication is increased
MIN = Chain lubrication is decreased
f) Adjustment of carburettor:
H = Full throttle nozzle screw
L = Idling nozzle screw
T = Idling screw
www.texas.dk
27