Table of Contents
Advertisement
Battery Voltage
The first figure shows the maximum battery voltage for the day ...the figure below is the minimum battery voltage.
Errors
Shows the number of errors (if any) for the day, to see the error codes click on the orange point. See
Codes. (You may need to slide the display on your device up to see the errors.)
Total
This shows the total energy converted by the installation and is not re-settable.
Since Cleared
This shows how much energy has been converted by the installation since the last reset.
4.5. Protections and automatic restarts
4.5.1. High battery voltage
Reduce DC input voltage and/or check for a faulty battery- or solar-charger in the system. After shutting down due to a high
battery voltage, the unit will first wait 30 seconds and then retry operation as soon as the battery voltage has dropped to
acceptable level.
4.5.2. High temperature
A high ambient temperature or enduring high charge current may result in MPPT reducing output and eventually shutting down to
over temperature. The MPPT will resume once the temperature falls to within specification.
4.6. Maintenance
The solar charger does not need regular maintenance. Unqualified users should not attempt to open the product casing.
Page 21
www.butlertechnik.com
Isolated SmartSolar MPPT RS
www.butlertechnik.com
MPPT Solar Charger Error
Operation
Advertisement
Table of Contents
