If the maximum AC mains operating voltage is higher than the PV array maximum system voltage, then the instructions shall
require PV modules that have a maximum system voltage rating based upon the AC mains voltage.
Environment and Access
Ensure that the equipment is used under the correct ambient conditions. Never operate the product in a wet or dusty
environment. Never use the product where there is a risk of gas or dust explosions. Ensure there is adequate free space for
ventilation above and below the product and check that the ventilation vents are not blocked.
Installation of this product must in a location that restricts access by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
The connections to live parts should be covered after installation.
Enclosure Symbols
Symbol on the enclosure
1.1. Meaning of icons
The icons printed on the product have the following meaning:
Icon
Meaning
Caution, risk of electric shock
Refer to the operating instructions
Page 2
www.butlertechnik.com
Isolated SmartSolar MPPT RS
Caution, risk of electric shock
Refer to the operating instructions
IP21 Protected from touch by fingers and objects greater than 12 millimetres. Protected
from condensation.
European conformity
Regulatory compliance mark for Australia & New Zealand
www.butlertechnik.com
Safety Instructions