Begin Pgm Bsp_L_Pos Mm; Calibration Tool Overall Length; Q1903; Q1913 - GARANT XCONTROL User Manual

counter of the measurements is
reset and the wireless connec-
tion is maintained.
Example
L_RESET(1) Call-up of the auxiliary cycle, counter is reset.
Back to Siemens automated operation [} Page 50]
7.4. HEIDENHAIN AUTOMATIC OPERATION
The parameters Q1899-Q1940, QR59-QR67 are overwritten during the measurement process. The sub-program collection
comprises standard measurement cycles for the controller Heidenhain iTNC 530 / TNC 640. The sub-program folders must
be saved directly in path TNC:\. The sub-programs are configured for the G17 level. The probe cycles work exclusively with
the XControl.
Cycle
7.4.1. Probe cycle BSP_L_POS
Probe cycle Function
BSP_L_POS.H. The program BSP_L_POS.H is for
determining the position of the
XControl in the machine coordin-
ates system. The reference tool
must be positioned centrally in
the tool axis with a distance of
approx. 5 mm to the contact
point above the XControl. The
two other axes are not travelled
in the probing process.
Example
0

BEGIN PGM BSP_L_POS MM

1 ;================================
2

; Calibration tool overall length

3

Q1903 = 5000

4 ;================================
5 ; M19 / M20 SPINDLE ORIENTATION
6

Q1913 = 19

7 ;================================
8

CALL PGM TNC:\X_CONTROL\L_POS.H

9 M30
10 ND PGM BSP_L_POS MM
For the above-mentioned variables, the values from the following table can be used.
Variable
Q1903
Q1913
Link
Note
The program is only required in
the following instances: - When
initially positioning the XControl
in the working area of the ma-
chine. - Each time the XControl is
repositioned in the working area
of the machine.
Value
ℝ≠0
ℤ>0
Program code
BSP_L_POS.H
Meaning
Exact length of the reference tool.
Value for spindle orientation M19 =>
Q1913=19
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
53