Advertisement
Setup - Before Use (continued)
Assembly
column to Base
1. Loosen Set Screw (9) in Rack Collar (78) and
remove Rack Collar and Gear Rack (92) from
the Column (101). The Gear Rack is stowed
in this position only for transit purposes.
2. Place Column Base (93) on the Base (94) and align
the holes in the Column Base with holes in Base.
3. Attach using Bolt (102) in each hole
through the Column and into the Base.
Table to column
1. Assemble Worm Gear (84) and Lock Handle
(81) to the Table Support (82). Do not tighten
down the Lock Handle at this time.
Table
Support (82)
Page 6
Worm
Gear (84)
Lock
Handle (81)
For technical questions, please call 1-888-866-5797.
Base (94)
2. With the longer smooth end of Gear Rack
(92) uppermost, place Gear Rack into notch
of Table Support opening, making sure Gear
Rack meshes with teeth of Inner Gear (83).
3. Assemble the Table (87) to the Table
Support with the Angle Bolt (88).
Table (87)
Table
Support (82)
column (101)
Bolt (102)
column
Base (93)
Gear
Rack (92)
Item 58782
Advertisement
