Download
Share
Print this page
Bauer 22202E-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Vacuum Cleaner
  5. 22202E-B
  6. Owner's manual & safety instructions

Bauer 22202E-B Owner's Manual & Safety Instructions

1/2" x 50 ft. drain cleaning drum machine
Hide thumbs Also See for 22202E-B:

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
1/2" X 50 FT.
DRAIN CLEANING
DRUM MACHINE
22202E-B
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
22201E-B
WITH POWER FEED
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23i

Advertisement

loading

Related Manuals for Bauer 22202E-B

Summary of Contents for Bauer 22202E-B

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 1/2" X 50 FT. DRAIN CLEANING DRUM MACHINE 22202E-B 22201E-B WITH POWER FEED Visit our website at: http://www.harborfreight.com email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.

  • Page 2: Table Of Contents

    table of contents Important Safety Instructions ...... 2 Maintenance and Servicing ....... 18 Specifications ..........7 Parts List and Diagram ......20 Setup - Before Use: ........8 Warranty ............ 24 Operation ........... 11 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
  • Page 3 Service 1. Have your power tool serviced by a 2. Maintain labels and nameplates on qualified repair person using only identical the tool. These carry important safety replacement parts. This will ensure that the information. If unreadable or missing, contact safety of the power tool is maintained.
  • Page 4 20. Do not operate this machine if operator or 23. WarninG! tO preVent SeriOuS inJury: machine is standing in water. Operating machine people with pacemakers should consult while in water increases the risk of electrical shock. their physician(s) before using this product. Electromagnetic fields in close proximity to a heart 21.
  • Page 5 GrOunDinG inStructiOnS This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
  • Page 6 extension cords 1. Grounded tools require a three wire extension cord. 5. If you are using one extension cord for more If an extension cord (or a longer detachable than one tool, add the nameplate amperes power-supply cord) is used: and use the sum to determine the required minimum cord size.

  • Page 7: Specifications

    Symbology Read the manual before Volts set-up and/or use. WARNING marking Alternating Current concerning Risk of Fire. Do not cover ventilation ducts. Amperes Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. n 0 xxxx/min. No Load Revolutions per Minute (RPM) Properly connect power cord to appropriate outlet.

  • Page 8: Setup - Before Use

    Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions Frame tool tray Handle Locking Knobs Belt Guard rotation Switch Quick-change enclosed...
  • Page 9 cutting tool accessories Four Cutting Tools are included with each Drain Cleaner. Select appropriate tool for the cleaning job and attach to Cable. See table below. arrow cutter Boring Bulb cutter c-cutter Spade cutter removal tool cutter tool applications Arrow Cutter Starting tool;...
  • Page 10 assembly for 59533 note: No assembly needed for Model 59534. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the rotation Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagrams near the end of this manual.

  • Page 11: Operation

    Operating instructions read the entire iMpOrtant SaFety inStructiOnS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the rotation Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 12 16. With dry hands, plug cord into grounded outlet 18. Move Feed Lever to exactly in-between and move Rotation Switch into Forward position. F and R settings or cable will start moving in or out during test. WarninG! tO preVent eLectric SHOcK anD DeatH: test Ground Fault circuit interrupter 19.
  • Page 13 Work area Set-up 1. Verify work area has adequate lighting for job. 11. Make sure Drain Cleaner handle is locked in upright position for transport. If Drain Cleaner 2. Confirm work area is free of flammable liquids, needs lifted, use proper lifting techniques or vapors or dust that may ignite.
  • Page 14 Manual Feed Operation (For item 59534) tO preVent SeriOuS inJury FrOM tWiSteD Or BrOKen caBLeS, caBLe enDS WHippinG arOunD, MacHine tippinG, cHeMicaL BurnS, inFectiOnS, eLectric SHOcK anD OtHer cauSeS: Follow operating instructions for your model explicitly. Since drains likely contain hazardous chemicals or bacteria, wear appropriate protective equipment, such as: •...
  • Page 15 Working through a Blockage 1. If cutting tool becomes lodged in blockage 2. Once tool is free of blockage and is turning again, and Drain Cleaner is still operating, cable will slowly feed rotating cutting tool back into blockage. start to wind up or twist. If so, immediately Do not force tool through blockage.
  • Page 16 power Feed Operation (For item 59533) tO preVent SeriOuS inJury FrOM tWiSteD Or BrOKen caBLeS, caBLe enDS WHippinG arOunD, MacHine tippinG, cHeMicaL BurnS, inFectiOnS, eLectric SHOcK anD OtHer cauSeS: Follow operating instructions for your model explicitly. Since drains likely contain hazardous chemicals or bacteria, wear appropriate protective equipment, such as: •...
  • Page 17 Working through a Blockage 1. If cutting tool becomes lodged in blockage and 4. If motor can’t pull cable out, release pressure from Drain Cleaner is still operating, cable will start Foot Switch and allow cable to stop spinning. to wind up or twist. If so, release pressure from Once cable has stopped spinning, grab cable Foot Switch and Drain Cleaner motor will stop.

  • Page 18: Maintenance And Servicing

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the rotation Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
  • Page 19 General cleaning, Maintenance, and Lubrication 1. BeFOre eacH uSe, inspect the general 2. aFter uSe, wipe external surfaces condition of the tool. Check for: of the tool with clean cloth. • loose hardware, WarninG! tO preVent SeriOuS • misalignment or binding of moving parts, inJury: if the supply cord of this power tool is damaged, it must be replaced only •...

  • Page 20: Parts List And Diagram

    parts List and Diagram parts List 59533 part Description part Description Circlip Ø48 Retaining Pin Screw/Set Screw M4×10 Cover Bolt M8×35 Power Feed Lever M8 Tool Holder Plastic Ball M8 Screw St4.8×20 Terminal A Taper Nut M6 Front Seat Screw M6×10 Spring Pin Ø8×20 Tool Holder Cover Washer...
  • Page 21 assembly Diagram 59533 record product’s Serial number Here: note: if product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify item number when ordering.
  • Page 22 parts List 59534 part Description part Description Cable Screw M4×6 Drum Cable Washer Ø4 Bolt M8×20 Electrical Box Cover Washer Ø8 Insulating Mat Screw M6×20 Power Cord Washer Ø6 GFCI Compression Spring Ø1×Ø7.5×20 Foot Switch Screw M6×30 Rotation Switch Front Hub Bushing Current Protector Locknut M6 Switch...
  • Page 23 assembly Diagram 59534 Item 59533 59534 For technical questions, please call 1-888-866-5797. Page 23...

  • Page 24: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

22201e-b