Advertisement
Vibration Safety
This tool vibrates during use. Repeated or
long-term exposure to vibration may cause
temporary or permanent physical injury,
particularly to the hands, arms and shoulders. To
reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an
extended period should first be examined by a
doctor and then have regular medical check-ups
to ensure medical problems are not being caused
or worsened from use. Pregnant women or
people who have impaired blood circulation to
the hand, past hand injuries, nervous system
disorders, diabetes, or Raynaud's Disease should
not use this tool. If you feel any medical or
physical symptoms related to vibration (such as
tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
Specifications
Setup - Before Use
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical
outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Mounting
Secure the tool to a supporting structure before use.
Before assembly, bolt the Base to a flat, level,
solid workbench capable of supporting the
weight of the drill press and any workpieces.
Item 58782
SAVE THESE INSTRUcTIONS.
Electrical Rating
Spindle Speed Range
Throat Depth
Table Tilt
Table Swing Around Column 360°
Spindle Stroke
Chuck to Spindle
Arbor Taper
Chuck Capacity
For technical questions, please call 1-888-866-5797.
2. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
3. Use tools with the lowest vibration when there
is a choice between different processes.
4. Include vibration-free periods each day of work.
5. Grip workpiece as lightly as possible (while still
keeping safe control of it). Let the tool do the work.
6. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
120VAC / 60 H z / 6.2A
630 - 3300 RPM
5" (10" Swing)
45º left and right
2"
JT33
1/2" (13mm)
Verify that installation surface has no hidden
utility lines before drilling or driving screws.
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: <1 mW,
Wavelength: 635-650 nm
CLASS II LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
22f
Distributed by Harbor Freight Tools,
Calabasas, CA, 58782
Manufacture Date: ___________, ______
Page 5
Advertisement
