Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
20v LITHIUM-ION
For Best results,
use 3.0 amp Hour Battery
(Sold Separately)
OSCILLATING MULTI-TOOL
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
or Greater
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
21101C-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23e
58379
Advertisement
Related Manuals for Bauer 21101C-B
Summary of Contents for Bauer 21101C-B
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 21101C-B 20v LITHIUM-ION For Best results, use 3.0 amp Hour Battery...
-
Page 2: Table Of Contents
table of contents Safety ............2 Operation ............ 8 Specifications ..........7 Maintenance ..........9 Setup ............7 Warranty ............ 12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
b. avoid body contact with earthed or g. if devices are provided for the connection grounded surfaces, such as pipes, of dust extraction and collection radiators, ranges and refrigerators. facilities, ensure these are connected and properly used. Use of dust collection There is an increased risk of electric shock if your body is earthed or grounded. - Page 4 d. Store idle power tools out of the reach of b. Disconnect the battery pack from the children and do not allow persons unfamiliar power tool before making any adjustments, with the power tool or these instructions changing accessories, or storing power to operate the power tool.
- Page 5 stable, solid, nonflammable surface (such as a c. Charge Battery Pack only according stable metal workbench or concrete floor) at to its Charger’s instructions. least 1 foot away from all flammable objects, d. Inspect Battery Pack before every use; such as drapes or walls. Keep a fire do not use or charge if damaged.
- Page 6 Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged.
-
Page 7: Specifications
Specifications Battery Type Bauer 20 V Li‑Ion 57007 (sold separately) Charger Type Bauer 20 V Li‑Ion 57006 (sold separately) No Load Speed n : 8000 ‑ 20000/min Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 8 Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Workpiece and Work area Set up 1. Workpiece selection: 2. Designate a work area that is clean and well lit. The work area must not allow access by children a.
- Page 9 Setting and testing 1. Ensure accessory is correctly attached to tool. 3. Switch the Power Switch to ON and run the tool for at least 30 seconds. 2. Switch the Power Switch to the OFF position then insert a fully charged Battery Pack, 4.
-
Page 10: Maintenance
Maintenance and Servicing instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and remove its Battery pack before performing any procedure in this section. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment. - Page 11 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are no connected. obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.