Quit; Using Vgaconf From The Command Line - Epson ActionNote User Manual

Enter the number of minutes to wait before entering standby
mode and press
activity. If you enter
if there is no keyboard activity for the specified number of
minutes. If you enter
if video memory is not accessed for the specified number of
minutes. Press
The standby mode initiated by the VGACONF utility is exactly
the same as Suspend mode. You can reactivate the system at
any time by pressing the spacebar.

Quit

Select Quit to exit the VGACONF program and return to the
operating system prompt.
Using VGACONF from the Command fine
To quickly change one or more VGA configuration settings,
you can initiate VGACONF from the command line with
option parameters. At the command prompt, enter the
VGACONF command in the following format:
VGACONF [options]
In place of the options parameter, you enter one or more of the
option names listed in the following table. If you enter two or
more, separate the options with a space.
6-10 Using the VGA Utilities
Then enter
K
the LCD panel will enter standby mode
K,
, the LCD panel will enter standby mode
M
to initiate the timer.
or to indicate the type of
M