Table of Contents
Advertisement
5-8
Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on the
H8DGG-QF serverboard. The amber LED on
the right indicates activity, while the green
LED on the left indicates the speed of the
connection. See the table at right for more
information.
UID LED (LE1)
A rear UID LED Indicator, located at LE1,
works in conjunction with the rear UID switch
to provide easy identification for a unit that
might be in need of service. Refer to Page
2-13 for further UID details.
Power LED
DP2 is an Onboard Power LED. When this
LED is lit, it means power is present on the
serverboard. Be sure to turn off the system
and unplug the power cord(s) before remov-
ing or installing components.
(Connection Speed
LED Color
Off
Green
Amber
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color
Green:
Solid
Amber
Blinking
State
On
Off
5-19
Chapter 4: System Safety
LAN LED
Indicator)
Definition
10 MHz
100 MHz
1 GHz
Status
Definition
Link
100 Mb/s
(Left)
Activity
Active
(Right)
Power LED
(DP2)
System Status
Standby power present
on motherboard
No power connected
Advertisement
Table of Contents
