Electronic Control Setup; Maintenance Instructions - Maytag MLE24PDAGW Instructions Manual

See the programming guide for information on setup.

Maintenance instructions:

Clean lint screen after each cycle.
n
Removing accumulated lint (disconnect dryer from electricity
n
supply before starting this task):
From inside the dryer cabinet:
•
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done by a
qualified person.
From the exhaust vent:
•
Lint should be removed every 2 years, or more often,
depending on dryer usage.

ELECTRONIC CONTROL SETUP

MAINTENANCE INSTRUCTIONS
If dryer does not operate check the following:
Electric supply is connected.
n
Circuit breaker is not tripped or house fuse is not blown.
n
Door is closed.
n
Controls are set in a running or "ON" position.
n
Cycle has been selected.
n
If you need assistance:
Contact your authorized Maytag Commercial Laundry distributor,
or visit: www.MaytagCommercialLaundry.com. When you call,
you will need the dryer model number and serial number. Both
numbers can be found on the serial-rating plate located on your
appliance.
Manufacturer: Whirlpool Corporation,
Benton Harbor, Michigan 49022, U.S.A.
Manufacturing site: Whirlpool Corporation,
1300 Marion-Agosta Road, Marion, OH 43302, U.S.A.
EU representative: Maytag UK Ltd, Redhill, RH1 1AX, UK,
& Bauknecht Hausgerate GmbH, D-73614 Schorndorf, Germany
9