Table of Contents
Advertisement
V. DISASSEMBLY and BATTERY REPLACEMENT
To disassemble your Alanté Sport, simply reverse the assembly process. See pages 11-15.
Make certain that the controller power is turned off and that the
chair is NOT in freewheel mode before attempting to perform disassembly.
Accessing the batteries
1. Loosen the joystick adjustment screw and slide the joystick out of the bracket.
2. Remove the seat by lifting it up and off of the seat post.
3. Remove the battery cover by unscrewing the two thumb screws, then lift the cover up
and off the base.
Battery Replacement
1. Disconnect each battery from the battery harness by disconnecting the two black
connectors. See figure 12.
2. Undo each Velcro battery strap holding the batteries in place.
3. Lift each battery out.
The batteries weigh 21 pounds each on the Alanté Sport. Please get help if
you do not feel capable of safely lifting that much weight.
Connector
Connector
Figure 12
16
Advertisement
Table of Contents
